Re: Re: stuck on black screen

cheers marcus :)

ramdisk rescue boots without any problems.

the opie dist. still black screens when using both the packaged zImage and
the zImage from /boot/

the opie dist. gets farther using the ramdisk rescue zImage, but then fails
with something along the lines of "unable to mount root filesystem on hda2"

thanks for the help, cant wait to get rid of windows ....

On 02/11/2007, Marcus Brown <marcusbrutus_at_internode.on.net > wrote:
>
> Dan,
>
> Please have a look at RamdiskRescue.
>
> Marcus.
>
> On Wed, 2007-10-31 at 23:50 +0000, Dan Leech wrote:
> > hi
> >
> > i believe im getting this same problem, any news on this?
> >
> > i run haret, it shows a dialog (botting linux), breiefly cuts to
> > console with some messages and then blanks and stays that way. (so I
> > guess somethings going wrong with the kernel?)
> >
> > im using a CF card which is partitioned as follows:
> >
> > Number Start End Size Type File system Flags
> > 1 31.7kB 250MB 250MB primary fat16
> > 2 250MB 512MB 263MB primary ext2
> >
> > the fat16 partition contains haret.exe, startup.txt and zImage as
> > specified ( http://www.handhelds.org/moin/moin.cgi/CardBoot) and im
> > using the oopie package.
> >
> > this is the log file using earlyharetlog.txt hack...
> >
> >
> > ===== HaRET 0.5.0 =====
> > Setting KMode to true.
> > Old KMode was 1
> > Finished initializing output
> > Loading dynamically bound functions
> > Function '?GXOpenDisplay@@YAHPAUHWND__@@ K_at_Z' in library 'gx' at
> > 0387122C
> > Function '?GXCloseDisplay@@YAHXZ' in library 'gx' at 038715EC
> > Function '?GXBeginDraw@@YAPAXXZ' in library 'gx' at 03871674
> > Function '?GXEndDraw@@YAHXZ' in library 'gx' at 0387176C
> > Function 'LoadLibraryExW' in library 'coredll' at 01F7206C
> > Function 'GetSystemPowerStatusEx2' in library 'coredll' at 01F77904
> > Function 'SleepTillTick' in library 'coredll' at 01F71F00
> > Function 'AllocPhysMem' in library 'coredll' at 01F71E08
> > Function 'FreePhysMem' in library 'coredll' at 01F71E90
> > Function 'CreateToolhelp32Snapshot' in library 'toolhelp' at 0261108C
> > Function 'Process32First' in library 'toolhelp' at 0261114C
> > Function 'Process32Next' in library 'toolhelp' at 026111B4
> > Function 'Module32First' in library 'toolhelp' at 0261133C
> > Function 'Module32Next' in library 'toolhelp' at 026113B0
> > Function 'CloseToolhelp32Snapshot' in library 'toolhelp' at 02611090
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Detecting memory
> > WinCE reports memory size 67108864 (phys=29933568 store=29859840)
> > Detecting current machine
> > Trying to detect machine (Plat='PocketPC' OEM='hp iPAQ h2200')
> > Wince reports processor: core=Intel(R) name=PXA255 cat= vend=INTEL
> > Looking at machine HTC Universal
> > Looking at machine Alpine
> > Looking at machine Apache
> > Looking at machine AximX50
> > Looking at machine AximX5
> > Looking at machine Beetles
> > Looking at machine Blueangel
> > Looking at machine Himalaya
> > Looking at machine Magician
> > Looking at machine H1910
> > Looking at machine H1940
> > Looking at machine H2200
> > Registering command IGPIO
> > Registering command WG|PIO
> > Registering command GPLR
> > Registering command GPDR
> > Registering command GAFR
> > Registering command GPIO
> > Registering command GPIOST
> > Registering command LOADLIBRARYEX
> > Registering command TRACES
> > Registering command RESUMETRACES
> > Registering command WI|RQ
> > Registering command TRACE
> > Registering command TRACEMASK
> > Registering command TRACE2
> > Registering command TRACETYPE
> > Registering command TRACE2TYPE
> > Registering command INSN
> > Registering command INSNREENABLE
> > Registering command INSNREG1
> > Registering command INSNREG2
> > Registering command INSN2
> > Registering command INSN2REENABLE
> > Registering command INSN2REG1
> > Registering command INSN2REG2
> > Registering command ALTL1TRACE
> > Registering command MAXL1TRACE
> > Registering command MAXL1TRACERESUME
> > Registering command MMUTRACE
> > Registering command TRACEIGNORE
> > Registering command TRACEFORWATCH
> > Registering command PERMISSIVEMMUTRACE
> > Registering command KILL
> > Registering command PS
> > Registering command LSMOD
> > Registering command ADDR2MOD
> > Registering command AC97
> > Not registering command ATIDBG
> > Initializing for machine 'H2200'
> > HaRET(1)# set ramaddr 0xa0000000
> > HaRET(2)# addlist IRQS p2v(0x40D00000) 0x7f 32 0
> > HaRET(3)# addlist IRQS p2v(0x40E00048) 0 32 0
> > HaRET(4)# addlist IRQS p2v(0x40E0004c) 0 32 0
> > HaRET(5)# addlist IRQS p2v(0x40E00050) 0 32 0
> > HaRET(6)# addlist GPIOS p2v(0x40E00000)
> > HaRET(7)# addlist GPIOS p2v(0x40E00004)
> > HaRET(8)# addlist GPIOS p2v(0x40E00008)
> > HaRET(9)# addlist GPIOS p2v(0x40E0000C)
> > HaRET(10)# addlist GPIOS p2v(0x40E00010)
> > HaRET(11)# addlist GPIOS p2v(0x40E00014)
> > HaRET(12)# addlist GPIOS p2v(0x40E00054)
> > HaRET(13)# addlist GPIOS p2v(0x40E00058)
> > HaRET(14)# addlist GPIOS p2v(0x40E0005c)
> > HaRET(15)# addlist GPIOS p2v(0x40E00060)
> > HaRET(16)# addlist GPIOS p2v(0x40E00064)
> > HaRET(17)# addlist GPIOS p2v(0x40E00068)
> > Welcome, this is HaRET 0.5.0 running on WindowsCE v4.20
> > Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF
> > Detected machine H2200/PXA (Plat='PocketPC' OEM='hp iPAQ h2200')
> > CPU is Intel XScale ARM arch 5TE revision 3 product 16 stepping 6
> > running in system mode
> > Enter 'HELP' for a short command summary.
> >
> > Running WSAStartup
> > Starting gui
> > In initdialog
> > Found machine H2200
> > executing startup.txt
> > HaRET(1)# set KERNEL zImage
> > HaRET(2)# set MTYPE 341
> > HaRET(3)# set CMDLINE "root=/dev/hda2 rootdelay=5
> > console=ttyS0,115200n8 console=tty0"
> > HaRET(4)# bootlinux
> > boot KERNEL=zImage INITRD=
> > Opening file zImage
> > boot params: RAMADDR=a0000000 RAMSIZE=04000000 MTYPE=341
> > CMDLINE='root=/dev/hda2 rootdelay=5 console=ttyS0,115200n8
> > console=tty0'
> > Boot FB feedback: 1
> > Built virtual to physical page mapping
> > Allocated 345 pages (tags=47C00000/a383f000 kernel=47C01000/a3844000
> > initrd=47D55000/a35ad000 index=47D55000/a35ad000)
> > Built kernel tags area
> > Built page index
> > Video buffer at 8FC42000 sx=240 sy=320 mx=60 my=53
> > Video Phys FB=04042000 Fonts=a35ab064
> > preload=2168_at_47D58000/a35aa000 sj=47D58000 stack=47D56000/a35ac000
> > data=47D57000/a35ab000 exec=a35aa128
> > Reading 1390316 bytes...
> > Read complete
> > Launching to physical address a35aa010
> > Trampoline setup (tram=136_at_0002B46C/2002b46c/a035846c)
> > MMU setup: mmu=B00B0000/a02b0000
> > Go Go Go...
> >
> >
> > cheers :)
> >
> > --
> > Dan Leech
> >
> > Dynamic Web Sites
> > www.dantleech.com
> >
> > Bath Gigs
> > www.bathgigs.co.uk
> > _______________________________________________
> > H2200-port mailing list
> > H2200-port_at_handhelds.org
> > https://handhelds.org/mailman/listinfo/h2200-port
>
Received on Sat Nov 03 2007 - 15:45:03 EST