Re: Updating project page

Koen Kooi wrote:

> Hello,
>
> The project page (http://www.handhelds.org/projects/h2200.html) is a bit out of
> date. My proposal is put in the following:
>
> Things that work
>
> * Kernel boots to commandline prompt
> * PCMCIA/CF works.
> * LCD works though some further tweaking may be required.
>

IRDA status. A good description in the wiki on how to get it working
(including linux PC stuff to do) would be welcome as the h2210 does not
come with an serial cable.

> Developer Info
>
> Jtag
>
> JTAG Connector
> JTAG is routed to card edge "connector" con1.
>
> * pin 1: TDI-asic
> * pin 2: GND
> * pin 3: TDO-CPU
> * pin 4: TDO-ASIC
> * pin 5: TCK
> * pin 6: TDI-cpu
> * pin 7: TMS
> * pin 8: not connected
> * pin 9: TRST#
> * pin 10: VDD 3.3V
>

Does the JTAG connection need to be on this page? This is not something
most people need. IMO, ot should be in the Wiki, just like the cradle
connector pinning.

> Things left to do
>
> * touchscreen
> * bluetooth
> * sound
> * read/write flash
> * SD and SD/IO
>
> Linux Kernel
>
> * Allocate H2200 machine type for Linux. done
> * Implement GPIO support for h2200. done
> * USB gadget support. done
> * Display: MQ1100.
> * LCD: turn on power to LCD. done
> * control frontlight done
> * Sound: ????
> * MMC same as s3c2410?
> * Bluetooth
> * buttons
> * touchscreen driver
> * frontlight done
>
>
> (This was inspired by h5400)
>
> I hope you'll agree with this and someone (Michael?, Andrew?) adds this. Next
> week when my cable (yes, DSL is still months away, but cable only 5 days)
> connection gets activated I will apply for a cvs account.
>

At least you have an 2210 already. Mine should arrive today or tomorrow,
the ADSL arrived some days ago :-)

Regards,

Bas.
Received on Thu Mar 04 2004 - 14:22:13 EST