Updating project page

Hello,

The project page (http://www.handhelds.org/projects/h2200.html) is a bit out of
date. My proposal is put in the following:

Things that work

    * Kernel boots to commandline prompt
    * PCMCIA/CF works.
    * LCD works though some further tweaking may be required.

Developer Info

Jtag

JTAG Connector
JTAG is routed to card edge "connector" con1.

    * pin 1: TDI-asic
    * pin 2: GND
    * pin 3: TDO-CPU
    * pin 4: TDO-ASIC
    * pin 5: TCK
    * pin 6: TDI-cpu
    * pin 7: TMS
    * pin 8: not connected
    * pin 9: TRST#
    * pin 10: VDD 3.3V

Things left to do

    * touchscreen
    * bluetooth
    * sound
    * read/write flash
    * SD and SD/IO

Linux Kernel

    * Allocate H2200 machine type for Linux. done
    * Implement GPIO support for h2200. done
    * USB gadget support. done
    * Display: MQ1100.
    * LCD: turn on power to LCD. done
    * control frontlight done
    * Sound: ????
    * MMC same as s3c2410?
    * Bluetooth
    * buttons
    * touchscreen driver
    * frontlight done

(This was inspired by h5400)

I hope you'll agree with this and someone (Michael?, Andrew?) adds this. Next
week when my cable (yes, DSL is still months away, but cable only 5 days)
connection gets activated I will apply for a cvs account.

regards,

Koen
    

-- 
Intentionally left blank