Re: Trying to make usb networking work

Hello Andrew,

This definitely makes a difference: what used to work no longer works!
So this setting should be correct.

I'll try to play with tcpdump...

:-)

    Michael.

>Some thoughts: it is possible that some GPIO haven't been set up
>correctly, and this prevents UDC from receiving packets. A possible
>cause could be the H2200_GPIO_USB_PULL_UP_N signal, but if it is really
>a inverted signal, it looks like it is initialized correctly. However,
>if it is really a non-inverted signal, you can try to change
>SET_H2200_GPIO_N(USB_PULL_UP, 0); to SET_H2200_GPIO_N (..., 1) and vice
>versa - 1 to 0 in h2200.c, then see if this makes any difference.
>
>

-- 
Michael Opdenacker
http://opdenacker.org/