Re: Progress and Wiki

Hello Andrew,

Well, the freeze doesn't seem to be cause by your udc changes. Without
them, this still happens.
It's not Patty's fault either, as I have not included h2200_lcd stuff to
my kernel image.

By the way, Andrew, you added extra spaces between the SET_H2200_GPIO_N
and GET_H2200_GPIO macros and their arguments. I fixed that, but this
has nothing to do with the freeze.

Does anyone else observe this freeze too? It could be something wrong on
my side too...

    Cheers,

    Michael.

> Thanks Andrew! Well seen!
>
> Unfortunately, your changes seem to freeze the device:
>
> Linux version 2.6.1-rmk0-hh0 (mike@localhost.localdomain) (version gcc
> 3.3.2) #1
> Sun Feb 22 17:20:23 CET 2004
> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)
> CPU: D undefined 5 cache
> CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
> CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
> Machine: HP iPAQ H2200
> Memory policy: ECC disabled, Data cache writethrough
> <6>Memory clock: 99.53MHz (*27)
> <6>Run Mode clock: 398.13MHz (*4)
> <6>Turbo Mode clock: 398.13MHz (*1.0, inactive)
> [Freeze ... nothing happens any more]
>
> Here's what should have been next:
>
> On node 0 totalpages: 16384
> DMA zone: 16384 pages, LIFO batch:4
> Normal zone: 0 pages, LIFO batch:1
> HighMem zone: 0 pages, LIFO batch:1
> Building zonelist for node : 0
> Kernel command line: root=/dev/ram0 rw console=ttyS0,115200n8
> init=/linuxrc cachepolicy=writethrough
>
> Investigating... Will test Patty's changes when this is fixed... With
> Patty's changes, the kernel is frozen too, but the screen is on.
>
> :-)
>
> Michael.
>
>> On Sun, 22 Feb 2004 15:18:38 +0300
>> Andrew Zabolotny <zap@homelink.ru> wrote:
>>
>>
>>
>>> I would suggest better to find out what's wrong with USB
>>>
>>
>> After looking into h2200.c I see the thing that's wrong with USB is
>> obvious: you don't have any actual UDC code in there. They're just
>> placeholder functions. I tried to add a few lines similar to those in
>> e7xx_udc.c, now someone has to try them.
>>
>> --
>> Greetings,
>> Andrew
>> _______________________________________________
>> H2200-port mailing list
>> H2200-port@handhelds.org
>> https://handhelds.org/mailman/listinfo/h2200-port
>>
>>
>>
>>
>
>

-- 
Michael Opdenacker
http://opdenacker.org/