LAB almost booting from HaRET - then to move on to flash!

Hi folks,

I expect that today or tomorrow I will get LAB working with HaRET, then
I willb e able to move on to flashing it.

Here is the output I am getting right now.

joshua

¡*Ö.--«..W/.Y'HL¼.0000155
                          Running interactively
                                               Kernel stack at: 0xA0074BC0
 
   Going to run kernel from 0x00000000
 
                                      Setting up tagged list...
 
                                                               Command
line: cachepolicy=writethrough forcecli

Probing RAM size:
                  BANK 00@A0000000: 0x40Mb
                                          BANK 01@A4000000: NO RAM
                                                                  BANK
02@A8000000: NO RAM
 
                   BANK 03@AC000000: NO RAM
 
                                           Finished building tags
 
                                                                 ***
Jumping into kernel
 
 
                 Uncompressing Linux............................ .
 
 
                                                                 4

CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE)

CPU: D undefined 5 cache

CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

Machine: HP iPAQ H2200

Memory policy: ECC disabled, Data cache writethrough

<6>Memory clock: 99.53MHz (*27)

<6>Run Mode clock: 398.13MHz (*4)

<6>Turbo Mode clock: 398.13MHz (*1.0, inactive)

--++> Serial cable detected <++--

<7>On node 0 totalpages: 16384

<7> DMA zone: 16384 pages, LIFO batch:4

<7> Normal zone: 0 pages, LIFO batch:1

<7> HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line: cachepolicy=writethrough forcecli

lab: Skipping autoboot due to forcecli parameter.

<7>Relocating machine vectors to 0xffff0000

PID hash table entries: 512 (order 9: 4096 bytes)

Console: colour dummy device 80x30

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

<6>Memory: 64MB = 64MB total

<5>Memory: 63856KB available (651K code, 208K data, 56K init)

Calibrating delay loop... 397.31 BogoMIPS

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

<6>CPU: Testing write buffer coherency: ok

<6>Linux NoNET1.0 for Linux 2.6

ipaq shamcop: using irq 104-130

<7>IRQ28 (GPIO5): falling edges

<3>shamcop adc: cannot find resource 2 in platform resources

<7>IRQ27 (GPIO4): rising falling edges

ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
Received on Tue Sep 21 00:42:22 2004