Fwd: Serial Cable

Begin doorgestuurd bericht:

> Van: Michael Opdenacker <zumbi3_at_free.fr>
> Datum: 30 januari 2004 9:10:21 GMT+01:00
> Kopie: Koen Kooi <koen_at_vestingbar.nl>, h2200-port_at_handhelds.org
> Onderwerp: Antw.: [H2200-port] Serial Cable
>
> Hi Koen,
>
> Here's the location of the final connectivity diagram:
> http://michaelo.free.fr/pda/h2210/connector/ipaq_connector.png
>
> Have a nice day!
>
> Cheers,
>
> Michael.
>
>> Hi Koen,
>>
>> Here's the connectivity map (I didn't find anything on the net,
>> though the h3800, h3900, h2200, h5400 and h5500 have the same
>> connectivity, so I had to do this by myself).
>>
>> That was not so easy, as the cradle pins are very small. I hap to
>> tape needles at the end of my multimeter pins...
>>
>> http://michaelo.free.fr/tmp/connector.png
>>
>> I'll add USB connectivity later (I need somebody else's hands to hold
>> the multimeter pin on the USB pin while I sense the cradle connector)
>> and make it public on the Wiki.
>>
>> It's cool if you can document how to make your own serial cable.
>>
>> Cheers,
>>
>> Michael.
>>
>>> Hello,
>>>
>>> After examining the photos I couldn't discover any resistors or
>>> diodes between
>>> the serial cable and connector. That means we can solder an serial
>>> plug to the
>>> charger plug. Michael can you give us a schematic of the
>>> connections? It should
>>> be a 2 minute job with a multimeter. When I have the pin connections
>>> I can
>>> photograph and document the process.
>>>
>>> regards,
>>>
>>> Koen
>>>
>>>
>>
>>
>
>
> --
>
> Michael Opdenacker
> http://opdenacker.org/
>
>
Received on Wed Jul 21 2004 - 13:02:07 EDT