RE: Upgraded rootfs to Opie 1.1.3

Hi Gwyneth

First I must admit that I havent tried the the latest releases, but earlier
I also had problems with CF cards. As you write the PCMCIA does identify the
card, but refuses to mount it.
Alain has used CF card and he did put a initrd and kernel on his webpage
which did work.
Unfortunately Im to much of a newbie to really understand what was wrong,
but at that time I could see that he used a older version of the PCMCIA.

Best Regards
Benny

-----Original Message-----
From: h2200-port-bounces_at_handhelds.org
[mailto:h2200-port-bounces_at_handhelds.org]On Behalf Of Gwyneth Morrison
Sent: 3. maj 2004 07:29
To: Michael Opdenacker; Gwyneth Morrison
Cc: h2200-port
Subject: Re: [H2200-port] Upgraded rootfs to Opie 1.1.3

On May 2, 2004 03:23 pm, Michael Opdenacker wrote:
> Hi Gwyneth,
>

> This is fixed in my latest rootfs
> (http://michaelo.free.fr/pda/ipaq/starterkit/rootfs_may2.tar.bz2,
> http://michaelo.free.fr/pda/ipaq/starterkit/rootfs_may2.tar.bz2.md5...
> wait 1/2 hour for the upload to complete), as well as in the apps CVS
> tree containing xtscal.

Got it (and mirrored) Turns out I still get the messsage about /proc/hal
but
calibratiuon works fine, and yes Koen, it crashes where you said it would.
Excellent - we are all at the same bookmark.

Odd my host system crashes when the ipac boots. I will upgrade the kernel on
it to see if that helps (unrelated to what you guys are doing) I will also
play with the CF card to see if I can make some progress.

PCMCIA sees and identifies it as hda, just won't mount fat16. Perhaps I will
try an ext2 fs.

Keep up the great work guys.

Gwyneth

> Good luck!
>
> :-)
>
> Michael.

_______________________________________________
H2200-port mailing list
H2200-port_at_handhelds.org
https://handhelds.org/mailman/listinfo/h2200-port
Received on Mon May 03 2004 - 13:19:16 EDT