Re: gpe Hangs on hp1940

At 02:40 AM 5/9/2007, Ravi Sankar Saripalli wrote:
>the gpe distribution used gpe-h1940-familiar-0.8.3-r8.tar.bz2
>Version of haret used: haret-0.3.8

What kernel? BTW, that's quite an old gpe package, isn't it? Did you
build it yourself?

>After tapping on the haret.exe and point init to the default.txt, I get
>a little penguin on the top left corner, and a blinking cursor below.
>And nothing happens.
>...
>set CMDLINE "root=/dev/mmcblk0p2 console=ttySAC2,115200n8 rootdelay=5 panic=30"

Try removing the "console-=" argument, which will give you more information
on-screen. Since you're redirecting it to the serial port, this is why the
screen remains blank. Without it, you'll at least see the tail end of the
kernel boot log.

BTW, you probably want to remove the "email remains the property of the
Australian Defence Organisation" on messages you send to public lists.
I hope I'm not endangering myself by quoting part of your message! ;-)

Tom.
Received on Wed May 09 2007 - 08:38:24 EDT