Re: h1940 - kernel 2.6.20-rc1 can't read my SD card

On Wednesday 24 January 2007 12:12, Arjan Schrijver wrote:
> Hi guys,
>
> Could you please test the new kernel with a new SD/MMC driver?
> We hope it solves the issues we've been having with the old driver.
> Can you please download, test, and report any issues? Thanks in
> advance! http://anymore.nl/ipaq/files/kernels/2.6.20-rc1-eabi-mmctest/
> Regards,
> Arjan

Thanks for your new kernel image.
The driver seems to fail, with a similar "transfer stillin progress"
result as Tom reports in his mail.

dmesg output:
(...)
<7>selected clock c0494dc0 (pclk) quot 438, calc 9609
<7>selected clock c0494dc0 (pclk) quot 438, calc 9609
<7>selected clock c0494dc0 (pclk) quot 36, calc 114020
<7>selected clock c0494dc0 (pclk) quot 36, calc 114020
<7>selected clock c0494dc0 (pclk) quot 36, calc 114020
<6>s3c2410-sdi s3c2410-sdi: running at 0kHz (requested: 0kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<4>mmc0: host does not support reading read-only switch. assuming
write-enable.
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<6>s3c2410-sdi s3c2410-sdi: running at 132kHz (requested: 131kHz).
<3>s3c2410-sdi s3c2410-sdi: mci_setup_data() transfer stillin progress.
<3>s3c2410-sdi s3c2410-sdi: mci_setup_data() transfer stillin progress.
<3>s3c2410-sdi s3c2410-sdi: mci_setup_data() transfer stillin progress.
<3>s3c2410-sdi s3c2410-sdi: mci_setup_data() transfer stillin progress.
<6>s3c2410-sdi s3c2410-sdi: running at 33750kHz (requested: 33750kHz).
<6>s3c2410-sdi s3c2410-sdi: powered down.

full boot log here:
(with initrd)
http://www.salug.it/~carlopalma/ipaq/linux-2.6.20-rc1/log_mmc_test-20070125

(without initrd)
http://www.salug.it/~carlopalma/ipaq/linux-2.6.20-rc1/log_mmc_test-20070125_woinitrd

Please let me know if there is some other test that I can do, or if I miss
something.

Still Thanks,
Carlo Palma

(...)