Re: New News

look back in the h1900 mails for Adrian's step-by-step on settng up
minicom for usb with the ipaq. I must say it worked for me.

-joachim

On Fri, 21 Jan 2005 01:15:51 -0600, DaMiEn667 <DaMiEn667_at_damien667.com> wrote:
> here's what I've accomplished so far:
>
> I am able to edit initrd now, so I have now added missing files.
>
> I reconpiled my FC3 kernel, yet again... but this time I added ALL of
> the USB Gadget options as modules... now I can connect to my ipaq using
> minicom...loads usbserial for a driver
>
> dmesg:
>
> usb 3-1.4: new full speed USB device using address 8
> usbserial_generic 3-1.4:2.0: Generic converter detected
> usb 3-1.4: Generic converter now attached to ttyUSB0
> usb 3-1.4: control timeout on ep0in
>
> cat /proc/bus/usb/devices:
>
> T: Bus=03 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 8 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
> P: Vendor=0525 ProdID=a4a6 Rev= 0.01
> S: Manufacturer=Linux 2.6.3-hh2 with pxa2xx
> S: Product=Gadget Serial
> S: SerialNumber=0
> C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbserial_generic
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> So as you can see, I am now able to comunicate using minicom to the 2.6
> ipaq...
>
> NEW PROBLEM: I can't seem to get minicom configured right, or maybe I'm
> still missing files in my initrd... when I type anything in the minicom
> when connected to the ipaq... the only thing the ipaq responds to is me
> pressing enter... and the only thing it does is print the following on
> the ipaq screen:
>
> as_recv_packet: port=0, NULL tty pointer
>
> Anyone have any idea what might be going on?
>
> DaMiEn667
> _______________________________________________
> H1900-port mailing list
> H1900-port_at_handhelds.org
> https://handhelds.org/mailman/listinfo/h1900-port
>
Received on Fri Jan 21 2005 - 16:17:23 EST