Re: Dual sleeve problems

On Thu, Jul 19, 2001 at 07:53:49AM -0400, Hicks, Jamey wrote:
>
> There is no memory_cs driver in the kernel. If the card is recognized as
> memory_cs then something is wrong. Please show all the messages from
> cardmgr.
>
> Jamey

On boot:
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
Mounting /proc
Loading Unix socket support
Using /lib/modules/2.4.6-rmk2-np1-fam4/kernel/net/unix/unix.o
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Setting up RAMFS, please wait...
Using /lib/modules/2.4.6-rmk2-np1-fam4/kernel/fs/ramfs/ramfs.o
Setting Date/Time from previous settings
Mon Jan 1 00:00:00 UTC 2001
Executing /sbin/init...
INIT: version 2.78 booting
Mounting local filesystems...
mount: ramfs already mounted on /mnt/ramfs
devpts on /dev/pts type devpts (rw,mode=0622)
mount: proc already mounted
Calculating module dependencies... depmod: *** Unresolved symbols in /lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o
done.
Loading modules: apm init_module successful init major= 254 irq=15
h3600_flite_control: pwr=1 brightness=25 ready=0
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
h3600_ts sa1100-rtc SA1100 Real Time Clock driver v1.00

INIT: Entering runlevel: 2
Configuring network interfaces: done.
Sotarting PCMCIA modulesLinux Kernel Card Services 3.1.22
  options: [pm]
/lib/modules/2.4.6-rmk2-np1-fam4/pcmcia/sa1100_cs.o: unresolved symbol h3600_sleeve_register_driver
/lib/modules/2.4.6-rmk2-np1-fam4/pcmcia/sa1100_cs.o: unresolved symbol h3600_sleeve_unregister_driver
ds: no socket drivers loaded!
/lib/modules/2.4.6-rmk2-np1-fam4/pcmcia/ds.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
 cardmgr.
cardmgr[59]: starting, version is 3.1.20
cardmgr[59]: no pcmcia driver in /proc/devices
cardmgr[59]: exiting

When I check pcnet_cs.o:
insmod /lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmc
/lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o: unresolved symbol ei_open
/lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o: unresolved symbol ethdev_init
/lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o: unresolved symbol register_pccard_driver
/lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o: unresolved symbol unregister_pccard_driver
/lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o: unresolved symbol ei_interrupt
/lib/modules/2.4.6-rmk2-np1-fam4/kernel/drivers/net/pcmcia/pcnet_cs.o: unresolved symbol NS8390_init

As mentioned on the list I load h3600-sleeve.o and h3600_stowaway.o:

So now when I start pcmcia:
bash-2.03# cardmgr[103]: starting, version is 3.1.20
cardmgr[103]: watching 2 sockets
cardmgr[103]: Card Services release does not match
cardmgr[103]: initializing socket 1
cardmgr[103]: socket 1: Anonymous Memory
cardmgr[103]: executing: 'modprobe memory_cs'
cardmgr[103]: + modprobe: Can't locate module memory_cs
cardmgr[103]: modprobe exited with status 255
cardmgr[103]: module /lib/modules/2.4.6-rmk2-np1-fam4/pcmcia/memory_cs.o not available
cardmgr[103]: get dev info on socket 1 failed: Resource temporarily unavailable

I'll reread the 2.4.6 wikki to see if anything else is mentioned.
Received on Thu Jul 19 2001 - 09:17:16 EDT