On Tue, Jul 17, 2001 at 11:10:54AM -0700, Bruce, Chris wrote:
> I installed the familiar (just the basic root package) on my Ipaq 3670.
> Everything worked just fine. I installed ppp on my linux box and was able
> to make the ppp connection to ipaq. I was also able to ping the ipaq. But
> I could NOT make any ssh, telnet, rlogin, etc connection to ipaq. The ipaq
> refused all connections. Also, I did nmap against ipaq and it shows NO open
> ports. Any ideas? I really would like to install some other packages. Oh
> yeah, I also DID run the 'ipkg install_pending'. Thanks for any help in
> advance.
In order to connect to your iPaq using telnet, ssh, or rlogin, you
need telnetd, sshd, or rlogind running on the iPaq, and they are not
by default.
If you stop the ppp session, you should be able to get a login prompt
from your ipaq by using cu or tip (or minicom, or any other term
emulator) to connect directly to the serial port. There's a getty
listening there.
-- Mark C. Langston mark@bitshift.org Systems & Network Admin http://www.bitshift.orgReceived on Tue Jul 17 12:03:45 2001
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:38:27 EDT