RE: Help: pflash 2

Michael,

Please follow the instructions at
ftp://ftp.handhelds.org/pub/linux/compaq/ipaq/stable/install.html

I revised them once more today to make them easier to follow. Same
steps, same order, but an explicit request not to use the pflash
command.

From where you are now, I would repeat steps 12, 13, and 14 -- load
bootldr, watch for verifying done, and do the peek flash commands to
check the bootldr installation. After that, step 15: push the recessed
reset button to reboot it, etc.

Jamey

> -----Original Message-----
> From: michael.mason_at_digitalrum.com
> [mailto:michael.mason_at_digitalrum.com]
> Sent: Friday, July 13, 2001 8:20 AM
> To: familiar_at_handhelds.org
> Subject: [Familiar] Help: pflash 2
>
>
> The bootldr flash sector doesn't seem to be protecting
> correctly. It's an
> Ipaq 3660. Here's my terminal output:
>
> boot> load bootldr
> loading flash region bootldr
> using xmodem
> ready for xmodem download..
> Download Successful
> 00018980 bytes loaded to C0000400
> BSD sum value is: 00000000
>
> programming flash...erasing ...
> Erasing sector 00000000
> len=00018980
> writing flash..
> addr: 00000000 data: EA00008E
> addr: 00010000 data: E1A0C00D
> verifying ... done.
> boot> pflash 0 0xffff 1
> addr=00000000
> len=0000FFFF
> protect=00000001
> Protecting sector 00000000
> boot> qflash 2
> value = 00000000
> boot>
>
>
> I've left it on and in the cradle. Thanks!
>
> Mike.
>
> _______________________________________________
> Familiar mailing list
> Familiar_at_handhelds.org
> http://handhelds.org/mailman/listinfo/familiar
> irc://irc.openprojects.net #familiar
>
Received on Fri Jul 13 2001 - 06:04:11 EDT