Re: large file transfer to familiar - HELP

How can I take some space away from ram and add it to the block device?
Also, my ipaq is supposed to have 16 megs rom, and 64 megs ram.
From what df shows, it's only 16 and 32, is that so?
Thank you
Alex

At 12:22 PM 7/2/01 +0800, Geiger Ho wrote:
>from the status of your system, the block device is only of 868 kB
>availabe. If then you can't upload j2se to that. you can upload to the
>ram but j2se will be erased out when ipaq reboots. hope this help.
>
>On Sun, 1 Jul 2001, Aleksandr Bogomolov wrote:
>
>> Hi,
>> df gives me the following
>> # df
>> Filesystem 1k-blocks Used Available Use% Mounted on
>> /dev/mtdblock/3 15360 14492 868 95% /
>> ramfs 31576 184 31392 1% /mnt/ramfs
>> #
>>
>> is ramfs accessible, or do I have to something special to put files in
there?
>>
>> Thank you
>> Alex
>>
>>
>> At 11:38 AM 7/2/01 +0800, Geiger Ho wrote:
>> >try to type "df" to check whether you have enough space in the ipaq first.
>> >
>> >On Sun, 1 Jul 2001, Aleksandr Bogomolov wrote:
>> >
>> >> Hi,
>> >> I am trying to upload j2se to my ipaq.
>> >> I am uploading it using hyperteminal via zmodem.
>> >> Everything seems to be going fine, but just as it finishes
>> >> it gives me 'transfer cancelled by user' message, and ipaq's console
>prints
>> >> out 'segmentation fault'.
>> >> The file is rather large - around 12 megs or so.
>> >> This does not happen with the smaller files.
>> >> Can someone help me with this?
>> >>
>> >> Thank you
>> >> Alex
>> >>
>> >> Aleksandr Bogomolov
>> >>
>> >> _______________________________________________
>> >> Familiar mailing list
>> >> Familiar_at_handhelds.org
>> >> http://handhelds.org/mailman/listinfo/familiar
>> >> irc://irc.openprojects.net #familiar
>> >>
>> >>
>>
>> Aleksandr Bogomolov
>>
>>

Aleksandr Bogomolov
Received on Sun Jul 01 2001 - 21:21:22 EDT