from the status of your system, the block device is only of 868 kB
availabe. If then you can't upload j2se to that. you can upload to the
ram but j2se will be erased out when ipaq reboots. hope this help.
On Sun, 1 Jul 2001, Aleksandr Bogomolov wrote:
> Hi,
> df gives me the following
> # df
> Filesystem 1k-blocks Used Available Use% Mounted on
> /dev/mtdblock/3 15360 14492 868 95% /
> ramfs 31576 184 31392 1% /mnt/ramfs
> #
>
> is ramfs accessible, or do I have to something special to put files in there?
>
> Thank you
> Alex
>
>
> At 11:38 AM 7/2/01 +0800, Geiger Ho wrote:
> >try to type "df" to check whether you have enough space in the ipaq first.
> >
> >On Sun, 1 Jul 2001, Aleksandr Bogomolov wrote:
> >
> >> Hi,
> >> I am trying to upload j2se to my ipaq.
> >> I am uploading it using hyperteminal via zmodem.
> >> Everything seems to be going fine, but just as it finishes
> >> it gives me 'transfer cancelled by user' message, and ipaq's console prints
> >> out 'segmentation fault'.
> >> The file is rather large - around 12 megs or so.
> >> This does not happen with the smaller files.
> >> Can someone help me with this?
> >>
> >> Thank you
> >> Alex
> >>
> >> Aleksandr Bogomolov
> >>
> >> _______________________________________________
> >> Familiar mailing list
> >> Familiar@handhelds.org
> >> http://handhelds.org/mailman/listinfo/familiar
> >> irc://irc.openprojects.net #familiar
> >>
> >>
>
> Aleksandr Bogomolov
>
>
Received on Sun Jul 1 21:17:39 2001
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:38:27 EDT