RE: ! CAUTION bootldr-2.18.01 !

Could we get a straw poll of other people's experiences with the 3100?
I've loaded that version of the bootloader onto two 3150, U.S. versions,
and had no problems. Has anyone else used it? If so, which exact
model?

        - Andrew

> -----Original Message-----
> From: Krypton [mailto:krypton8_at_inwind.it]
> Sent: Thursday, February 07, 2002 11:22 AM
> To: familiar_at_handhelds.org
> Subject: [Familiar] ! CAUTION bootldr-2.18.01 !
>
>
> This message contain two replies to two message in order to
> help others, and avoid the same problem. Krypton
>
> ----- Original Message -----
> From: "Xavier Bestel" <xavier.bestel_at_free.fr>
> To: "Krypton" <krypton8_at_inwind.it>
> Sent: Thursday, February 07, 2002 2:56 PM
> Subject: Re: [iPAQ] iPaq 3130 with bootldr-2.18.01
>
>
> le jeu 07-02-2002 à 14:44, Krypton a écrit :
> > I have iPaq 3130
> > I followed all instructions installing a functional
> > bootldr-2.17.12.bin,
> all
> > OK.
> >
> > Then as second step I followed instructions in
> >
> http://familiar.handhelds.org/familiar/releases/v0.5.1/install
> /H3100/install
> > .html
> > in order to loading an updated bootldr-2.18.01.bin
> >
> > After Loading bootldr 2.18.01, all seemed OK, with verify...done
> > message. Then I pressed reset button, and....BRICK (?) Now
> no Splash
> > screen appears (with 2.17 it appeared) if I hold the center
> of
> > joypad during reset.
> >
> > Any syggestion ?
> > How can I send iPaq to Compaq CRL, what is the address or
> email to ask
> > repair ?
>
> >put it off the craddle, hold the joypad center, press reset, put it
> >back in the craddle, then you can stop holding the joypad center.
>
> Of course I've done the following actions
> 1. put off the craddle
> 2. hold the joypad center
> 3. press reset
> 4. after 2-3 seconds stop holding the joypad center.
> 5. put it back in the craddle
> CAUTION : It is DEAD after Loading bootldr 2.18.01 from
> within boot> load bootldr
>
> ----
>
> >From: "Hicks, Jamey" <Jamey.Hicks_at_compaq.com>
> >To: "Krypton" <krypton8_at_inwind.it>
> >Sent: Thursday, February 07, 2002 3:04 PM
> >Subject: RE: [iPAQ] iPaq 3130 with bootldr-2.18.01
> >
> >Make sure AC adapter is attached to the iPAQ. Press and hold the
> >center of joypad, push reset button, wait a second, release joypad.
> >Splash screen should appear.
> >
> >Is amber light on or flashing?
> >
> >If all else fails, send to me at CRL:
> >
> >---
> >James E. Hicks, Ph.D. Principal Member of the
> Technical Staff
> >jamey.hicks_at_compaq.com +1-617-551-7622
> >Compaq Cambridge Research Laboratory
> >One Cambridge Center, Cambridge, MA 02142
>
> Thank you James,
> Amber light is :
> Off : always off when out of cradle
> Blinking : blinking the first 10-15 seconds I put it in the
> cradle On : always on after 10-15 seconds I put it in the
> cradle AC adapter is (and were) attached and OK. Batteries
> has been full cherged before do the bootloader operations.
>
> Of course I've done the following actions
> 1. put off the craddle
> 2. hold the joypad center
> 3. press reset
> 4. after 2-3 seconds stop holding the joypad center.
> 5. put it back in the craddle
> CAUTION : It is DEAD after Loading bootldr 2.18.01 from
> within boot> load bootldr
>
>
> _______________________________________________
> Familiar mailing list
> Familiar@handhelds.org http://handhelds.org/mailman/listinfo/familiar
> irc://irc.openprojects.net #familiar
>
>
Received on Thu Feb 07 2002 - 08:30:07 EST