i am trying, unsuccessfully, to connect my ipaq to my linux box...
i have copied the files directly from the howto, changing only the serial
port on the desktop and the addresses...
here is the output:
[root_at_iris peers]# pppd call ipaq
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x508b84ce> <pcomp> <accomp>]
LCP: timeout sending Config-Requests
Connection terminated.
and that's it!...no connection
i can try it over and over again, all with the same result...
any help is greatly appreciated!
mike
Received on Fri Jun 15 2001 - 14:00:10 EDT
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:12:27 EDT