Re: Problem with suspend on 3660

Hi,

Thanks for your reply.

Pigeon wrote:
>
> > I just installed the familiar 0.4 distribution. So far everthing is ok
> > but I have problems with the suspend mode.
> > Whenever the iPAQ ist back from suspend the display stays "dark" that
> > means no backlight. And it is also not "active" that means the
> > touchscreen is not working.
>
> Try pressing those hardware buttons... if it comes up, that means
> you're fine. The screen saver of X thought that you've been idle for that
> long as the power is back on, so just at the time you power it on, the
> screen saver is launched.

I read this also on the mailing glist. But this is not my problem. The
only way I can get back my display is by rebooting. When using bl (the
util from the 3600_util) in this state I get

bad ioctl: Input/output error

So it seems thet the device controlling the screen is no longer working.

Also apm is no longer working

[root@ipaq irda]# apm
h3600_flite_power: timeout
h3600_flite_power: timeout
(0:00)

I tried it with kernel 2.4.6 and 2.4.7 with the same behaviour.

[root@ipaq irda]#
lsmod
Module Size Used
by
sa1100_ir 6848 0
(unused)
irda 171504 0
[sa1100_ir]
bitsy-uda1341 3664 0
(unused)
uda1341 4000 0
[bitsy-uda1341]
sa1100-audio 6048 0
[bitsy-uda1341]
soundcore 4496 2
[bitsy-uda1341]
ppp_async 7872 0
(unused)
ppp_generic 18448 0
[ppp_async]
slhc 5680 0
[ppp_generic]
h3600-sleeve 4480 0
(unused)
sa1100-rtc 5968 0
(unused)
apm 5024 0
(unused)
h3600_ts 12896 0 [h3600-sleeve apm]

When pressing the suspend button the console prints
h3600_sleeve_suspend-9- sleeve_dev->driver=00000000 sleeve suspended

When pressing again (wakeup) it prints
h3600_sleeve_resume-9- sleeve_dev->driver=00000000 sleeve resumed
h3600_flite_power: timeout
sa1100fb_setup_gpio 'mask' for GPIO is 3fc
run_sbin_pm_helper:258 pm_helper_path=/sbin/pm_helper

Any Ideas

Max

-- 
_______________________________________________________________
     \                  
    o/\_          DI Max Weninger
   <\__,\         Email (aardvark@eunet.at)          
    ">.  |         
     ` .-|        
        . \      
         . \    
         .-|      
_________._|____________________________________________________