AW: networking problem

-----Ursprungliche Nachricht-----
Von: Pigeon [mailto:pigeon@foruto.com]
Gesendet: Donnerstag, 30. August 2001 00:40
An: Kurt Dietrich
Cc: familiar@handhelds.org
Betreff: Re: [Familiar] networking problem

>Could you tell us more information? Is there any console messages
>or log when you insert the card? And are you using single or dual sleeve?
(Just a
>thought, make sure your sleeve is working first too)
>I'm using my level one pcmcia network card on my dual sleeve and
>it's working well.

I use a dual sleeve and teste two cards: then level one and the D-link 650.
Both are listed
in the hardware compatibility list at handhelds.org and should work. (i use
the familiar 0.4 version)

During boot this message appears:

        Starting PCMCIA services: modulesLinux PCMCIA Card Services 3.1.22
          options: [pm]
        SA-1100 PCMCIA (CS release 3.1.22)
         cardmgr.
        cardmgr[69]: starting, version is 3.1.20
        cardmgr[69]: watching 2 sockets
        cardmgr[69]: Card Services release does not match

The loaded modules are:

        Module Size Used by
        ds 7856 2
        sa1100_cs 10992 2
        pcmcia_core 35776 0 [ds sa1100_cs]
        sa1100-rtc 5744 0 (unused)
        apm 4976 0 (unused)
        h3600_ts 12432 0 [apm]
        ramfs 4848 1
        unix 17504 0
        nwfpe 58688 -1 (unused)

the file 20010101.log (from /var/log) shows:

        20010101 000001 start modprobe apm safemode=0
        20010101 000002 probe ended
        20010101 000002 start modprobe h3600_ts safemode=0
        20010101 000002 probe ended
        20010101 000002 start safemode=0
        20010101 000002 probe ended
        20010101 000003 start /sbin/modprobe -s -k -- eth0 safemode=1
        20010101 000003 probe ended
        20010101 000003 start /sbin/modprobe -s -k -- eth0 safemode=1
        20010101 000003 probe ended
        20010101 000003 start /sbin/modprobe -s -k -- eth0 safemode=1
        20010101 000003 probe ended
        20010101 000003 start /sbin/modprobe -s -k -- eth0 safemode=1
        20010101 000003 probe ended
        20010101 000003 start /sbin/modprobe -s -k -- eth0 safemode=1
        20010101 000003 probe ended
        20010101 000003 start /sbin/modprobe -s -k -- eth0 safemode=1
        20010101 000003 probe ended

There are no messages when i insert/remove the card.
How can i check if the sleeve works correctly?

thanx in advance
kurt.
Received on Thu Aug 30 02:20:57 2001