Re: [Question] PCMCIA Serial/Modem

DOI Yusuke wrote:
>
> Thank you very much Adam. I got your minicom (and libncurses).
>
Glad it served you.

>
> I have no idea on your problem. But I think we can compare the difference.
> I put console output of cardctl eject/insert cycle. Please check and see
> if something differs.
>
> sh-2.03# cardctl eject 0cardmgr[113]: executing: './serial check ttyS1'
>
> cardmgr[113]: shutting down socket 0
> cardmgr[113]: executing: './serial stop ttyS1'
> tty01 unloaded
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
> cardmgr[113]: executing: 'modprobe -r serial_cs'
> sh-2.03# cardctl insert 0
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
> cardmgr[113]: initializing socket 0
> cardmgr[113]: socket 0: Serial or Modem
> sh-2.03# cardmgr[113]: executing: 'modprobe serial_cs'
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
> bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
> ttyS01 at port 0xf60002f8 (irq = 42) is a 16550A
> cardmgr[113]: executing: './serial start ttyS1'
>
Hmm, my cardctl insert 0 output:

sh-2.03# cardctl insert 0
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
cardmgr[107]: initializing socket 0
cardmgr[107]: socket 0: Serial or Modem
cardmgr[107]: executing: 'modprobe serial_cs'
Serial driver version 5.05 (2000-12-13) with no serial options enabled
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
ttyS00 at port 0xf60002e8 (irq = 42) is a 16450
cardmgr[107]: executing: './serial start ttyS0'

Besides the extra 'Serial driver version 5.05....' line there's the
difference of your card being identified as a 16550A and mine as a
16450. Could that be crucial?

My output of cardctl eject is not complete because I lack something
called 'fuser':
cardmgr[107]: executing: './serial check ttyS0'
cardmgr[107]: + ./serial: fuser: command not found
cardmgr[107]: shutting down socket 0
cardmgr[107]: executing: './serial stop ttyS0'
cardmgr[107]: + ./serial: fuser: command not found
tty00 unloaded
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
cardmgr[107]: executing: 'modprobe -r serial_cs'

So now I need to get 'fuser'... does anybody know if I have to convert
an arm deb again, for this one? Yusuke, you made the ipkg yourself?
Could you pass it to me?

Cheers,

-- 
Adam Huuva / Easter-eggs                 Spécialiste GNU/Linux
44-46 rue de l'Ouest  -  75014 Paris  -  France -  Métro Gaité
Phone: +33 (0) 1 43 35 00 37    -   Fax: +33 (0) 1 43 35 00 76
mailto:sventon@easter-eggs.com  -   http://www.easter-eggs.com