Re: brick after one week without power

DOI Yusuke wrote:
>
> Have you tried power-cycle? (remember the power switch on the bottom)

If you mean that little hole on the right side - yes, I did. No effect.

Greetings,
Oliver

> Yusuke
>
> From: "Oliver Kurth" <oliver.kurth_at_innominate.de>
> Subject: [Familiar] brick after one week without power
> Date: Mon, 27 Aug 2001 12:12:43 +0200
>
> > Hello!
> >
> > I did not use the ipaq for one week now, and it was not attached to the
> > external power supply. Seems to be a brick now. When plugged to the
> > power supply the led is flashing, but nothing else happens. Absolutely
> > nothing, pressing buttons does not change anything, it is just off.
> > Resetting does not help either. Connecting via serial cable the line
> > seems to be dead.
> >
> > First I thought it is just low on power, so it needs some time to
> > recharge, but I have it on the power supply for more than 12 hours now.
> > It seems to be completely recharged because the flasing of the led stops
> > after a while and is on.
> >
> > So, is it a brick now? What can I do?
> >
> > Greetings,
> > Oliver
> > --
> > oliver.kurth_at_innominate.com
> > software engineer innominate AG
> >
> > tel: +49.30.308806-0 fax: -77 www.innominate.com
> >
> > _______________________________________________
> > Familiar mailing list
> > Familiar_at_handhelds.org
> > http://handhelds.org/mailman/listinfo/familiar
> > irc://irc.openprojects.net #familiar
> >
> >

-- 
oliver.kurth_at_innominate.com
software engineer                                        innominate AG
tel: +49.30.308806-0  fax: -77                      www.innominate.com