Re: brick after one week without power

Have you tried power-cycle? (remember the power switch on the bottom)

Yusuke

From: "Oliver Kurth" <oliver.kurth_at_innominate.de>
Subject: [Familiar] brick after one week without power
Date: Mon, 27 Aug 2001 12:12:43 +0200

> Hello!
>
> I did not use the ipaq for one week now, and it was not attached to the
> external power supply. Seems to be a brick now. When plugged to the
> power supply the led is flashing, but nothing else happens. Absolutely
> nothing, pressing buttons does not change anything, it is just off.
> Resetting does not help either. Connecting via serial cable the line
> seems to be dead.
>
> First I thought it is just low on power, so it needs some time to
> recharge, but I have it on the power supply for more than 12 hours now.
> It seems to be completely recharged because the flasing of the led stops
> after a while and is on.
>
> So, is it a brick now? What can I do?
>
> Greetings,
> Oliver
> --
> oliver.kurth_at_innominate.com
> software engineer innominate AG
>
> tel: +49.30.308806-0 fax: -77 www.innominate.com
>
> _______________________________________________
> Familiar mailing list
> Familiar_at_handhelds.org
> http://handhelds.org/mailman/listinfo/familiar
> irc://irc.openprojects.net #familiar
>
>
Received on Mon Aug 27 2001 - 02:51:07 EDT