RE: [iPAQ] Memory upgrades from PCE2000?

And how about ROM-upgrade? Have you tested it?

I am now planning to do following

     - Upgrade RAM to 64 MB
     - Upgrade ROM to 32 MB

Mika

                                                                                                                                               
                    "Hicks, Jamey"
                    <Jamey.Hicks@c To: "'Mika.Laitio@sysline.com'" <Mika.Laitio@sysline.com>
                    ompaq.com> cc: familiar@handhelds.org, ipaq@handhelds.org
                                          Subject: RE: [iPAQ] Memory upgrades from PCE2000?
                    22.08.2001
                    15:23
                                                                                                                                               
                                                                                                                                               

You can run Java 2 SE on an ipaq with 16MB of Flash, 32MB of DRAM and a
network or disk card. No upgrades required. We've had 3 of Blackdown's
JVM's running simultaneously in this configuration with the JDK available
via NFS.

With 32MB of flash, you should be able to install the Blackdown JDK
locally.

I would recommend going with the 64MB DRAM upgrade if you have to make a
quick decision. We have not demonstrated a need for 128MB of DRAM, really.

Jamey

> -----Original Message-----
> From: Mika.Laitio@sysline.com [mailto:Mika.Laitio@sysline.com]
> Sent: Wednesday, August 22, 2001 8:18 AM
> To: Hicks, Jamey
> Cc: familiar@handhelds.org; ipaq@handhelds.org
> Subject: RE: [iPAQ] Memory upgrades from PCE2000?
>
>
>
> Hi,
>
> and thanks again for your info!!!!
> If I upgrade memory to 128 MB, would it be possible to get it working
> somehow?
> For example in a wat that it would only use first 64 MB of
> the memory, or
> will problems prevent running whole IPaq until you have solved the
> problems?
>
> I need to demonstrate the usability of Java in IPaq and
> therefore I need to
> decide whether to upgrade the memory to
> 64 MB or 128 MB... (I need to make this decision very fastly)
>
> Mika
>
>
>
>
>
> "Hicks, Jamey"
>
>
> <Jamey.Hicks@c To:
> "'Mika.Laitio@sysline.com'" <Mika.Laitio@sysline.com>,
> familiar@handhelds.org,
> ompaq.com> ipaq@handhelds.org
>
>
> cc:
>
>
> 22.08.2001 Subject: RE:
> [iPAQ] Memory upgrades from PCE2000?
>
> 15:06
>
>
>
>
>
>
>
>
>
>
>
>
> We have had no problems with the 64MB upgrade from pce2000.
> We had some
> problems with the 128MB upgrade, but we are working with
> pce2000 to have
> our
> bootldr properly configure the memory controller.
>
> Jamey
>
> > -----Original Message-----
> > From: Mika.Laitio@sysline.com [mailto:Mika.Laitio@sysline.com]
> > Sent: Wednesday, August 22, 2001 7:50 AM
> > To: familiar@handhelds.org; ipaq@handhelds.org
> > Subject: [iPAQ] Memory upgrades from PCE2000?
> >
> >
> > Hi
> >
> > I need to get Blackdown JDK installed to IPaq and therefore I
> > will need to
> > upgrade the memory in the company known as PCE2000.
> > I read from 2 week old discussion that there were problems
> > with Familiar
> > and 128 MB memory. Is there any solutions for the problem.
> > (even in the
> > familiar cvs-code?)
> >
> > And how about if I upgrade the memory to 64 MB instead of 128
> > MB. Will this
> > work?
> > (Or is it possible to upgrade memory to 128 MB and only use
> > first 64 MB
> > with Linux?)
> >
> > Mika
> >
> > _______________________________________________
> > iPAQ mailing list
> > iPAQ@handhelds.org
> > http://handhelds.org/mailman/listinfo/ipaq
> > irc://irc.openprojects.net #ipaq
> >
>
>
>
>
Received on Wed Aug 22 05:41:43 2001