Network settings for IPaq (Fixed IP-address and Orinoco's WLAN-card)

I have installed Familiar v0.4 and I can use IPaq via Tera Term Pro
terminal from my Windows NT.
The next task I should do is the network setup.
I have Orinocos 11 mbt WLAN card and I would like to set fixed IP-address
for the Ipaq so that it could
connect itself to the network. When I put the WLAN-card in I got following
log after rebooting to my Tera Term Pro.

INIT: Entering runlevel: 2
Configuring network interfaces: done.
Starting PCMCIA services: modulesLinux PCMCIA Card Services 3.1.22
  options: [pm]
SA-1100 PCMCIA (CS release 3.1.22)
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
 cardmgr.
cardmgr[62]: starting, version is 3.1.20
cardmgr[62]: watching 2 sockets
cardmgr[62]: Card Services release does not match
cardmgr[62]: initializing socket 0
cardmgr[62]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter
cardmgr[62]: executing: 'modprobe wvlan_cs'
wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.6
wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de>
expr: not found
Starting OpenBSD Secure Shell server: sshdbitsy_pcmcia_configure_socket:
socket=
0 vcc=50 vpp=0 reset=0
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
wvlan_cs: index 0x01: Vcc 5.0, irq 42, io 0xf6000000-0xf600003f
wvlan_cs: Registered netdevice eth0
wvlan_cs: MAC address on eth0 is 00 02 2d 09 63 2d
error: Could not load host key: /etc/ssh/ssh_host_key: No such file or
directory
Disabling protocol version 1
error: Could not load DSA host key: /etc/ssh/ssh_host_dsa_key
Disabling protocol version 2
sshd: no hostkeys available -- exiting.
sshd: no hostkeys available -- exiting.

.
cardmgr[62]: executing: './network start eth0'

So I assume that my kernel is ok and it is supporting Orinoco's WLAN card
by default, is this correct?
If so, how what should I do for setting fixed values for following
     - IP address for my Familiar Linux
     - DNS name server address
     - Mask
     - Gateway

I assume that after getting these tasks done I could run ipkg update and
install packages like
"task-familiar-complete", "task-x" and "task-wireless" so that I could use
my IPaq without connecting it to the terminal.

Thanks,
     Mika
Received on Wed Aug 15 04:50:39 2001