problem with eth0 and 3Com

Apologies if this has been answered before; I can find a couple of the
same questions but the only answer is to charge the sleeve battery and
this has been done.

When I insert my 3Com 589 LAN card into a single card PCMCIA jacket I
keep getting the following:

====
# cardmgr[59]: + Operation failed.
cardmgr[59]: shutting down socket 1
cardmgr[59]: executing: './network stop eth1'
cardmgr[59]: + Operation failed.
cardmgr[59]: executing: 'modprobe -r 3c589_cs'
cardmgr[59]: + modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np
1/modules.dep (No such file or directory)
cardmgr[59]: modprobe exited with status 255
cardmgr[59]: initializing socket 0
cardmgr[59]: socket 0: 3Com 589 Ethernet
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
eth0: 3Com 3c589, io 0xf6000300, irq 42, hw_addr 00:80:00:81:00:82
   8K FIFO split 5:3 Rx:Tx, auto xcvr
cardmgr[59]: executing: './network start eth0'
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out!
   irq status 0801, rx status 0801, tx status 08 tx free 0801
   diagnostics: fifo 0804 net 0804 ethernet 0804 media 0804
eth0: command 0x5800 did not complete!
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out!
   irq status 0801, rx status 0801, tx status 08 tx free 0801
   diagnostics: fifo 0804 net 0804 ethernet 0804 media 0804
eth0: command 0x5800 did not complete!
====

with the NETDEV repeated over and over.

Has anyone managed to fix this? Have I done something silly? The
2.4.3-rmk2-np error concerns me a little .. I installed the 'lazy' set ..

Thanks!

~robp
        ... ...
        ...please send plain text mail if possible...
        ... ...
/******************************************************************\
| Robert Percival RiverSoft Support |
Received on Fri Aug 10 2001 - 02:06:59 EDT