ipaq file system corruption

Hi

since today my ipaq does not boot anymore.
It ran out of power yesterday (apm told hte that it was still 40%full short
before).
No it hangs during boot process.
What can I do.
Look like I lost a lot of files!

                Max

boot> boot
booting flash...
kernel_magic=E1A00000
kernel_region_words[9]=016F2818
Linux ELF flash_imgstart=50080000 size=00080000 dest=C0000000 offset=00008000
MMU Control=C19F4071
copying Linux kernel ... done
linuxEntryPoint: C0008000
kernel_image_dest: C0000000
kernel_image_offset: 00008000
C0008000: E1A00000
C0008004: E1A00000
C0008008: E1A00000
C000800C: E1A00000
C0008010: E1A00000
C0008014: E1A00000
C0008018: E1A00000
C000801C: E1A00000
C0008020: EA000002
C0008024: 016F2818
root_filesystem_name=ramdisk
argc=00000002
args=noinitrd root=/dev/mtdblock/3 init=/linuxrc console=ttySA0
setting boot parameters
get_param: could not find parameter system_rev
Setting up Linux parameters at address=C0000100
using_ramdisk=00000001
initrd_start=346C7466
dram_size=02000000
nr_pages=00002000
command line is: noinitrd root=/dev/mtdblock/3 init=/linuxrc console=ttySA0
linuxEntryPoint=C0008000
Booting Linux image
Uncompressing Linux....................................... done, booting the
kernel.
Linux version 2.4.3-rmk2-np1 (root@step) (gcc version 2.95.4 20010319 (Debian
prerelease)) #2 Mon May 14 12:21:48 PDT 2001
Processor: Intel StrongARM-1110 revision 6
Architecture: Compaq iPAQ
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/mtdblock/3 init=/linuxrc
console=ttySA0
Console: colour dummy device 80x30
Calibrating delay loop... 194.15 BogoMIPS
Memory: 32MB = 32MB total
Memory: 30872KB available (987K code, 256K data, 60K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
Console: switching to colour frame buffer device 40x30
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20224kB/6741kB, 64 slots per queue
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
SA1100 serial driver version 1.3
ttySA0 on SA1100 UART3 (irq 17)
ttySA1 on SA1100 UART1 (irq 15)
ttySA2 on SA1100 UART2 (irq 16), using IRDA
SA1100 flash: probing for 4 partitions (buswidth = 4)
SA1100: Found 2 x16 devices at 0x0 in 32-bit mode
JEDEC ID: 89 18
0: offset=0x0,size=0x40000,blocks=128
No RedBoot partition table found. Using default partitioning
parse_bootldr_partitions: partition_table_offset=0x40000
parse_bootldr_partitions: magic=0x646c7470
parse_bootldr_partitions: npartitions=0x4
        partition bootldr o=0 s=40000
        partition params o=40000 s=40000
        partition kernel o=80000 s=80000
        partition root o=100000 s=1f00000
Bootldr Partition: "bootldr", 0x00000000-0x00040000
Bootldr Partition: "params", 0x00040000-0x00080000
Bootldr Partition: "kernel", 0x00080000-0x00100000
Bootldr Partition: "root", 0x00100000-0x02000000
SA1100 flash access initialized
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Fast Floating Point Emulator V0.0 (c) Peter Teichmann.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x2
jffs2_scan_empty(): Empty block at 0x01d80000 ends at 0x01d801bc (with
0xffefffff)! Marking dirty
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01d801bc: 0xffff
instead
jffs2_scan_empty(): Empty block at 0x01d801c0 ends at 0x01d802c0 (with
0xfffeffff)! Marking dirty
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01d802c0: 0xffff
instead
jffs2_scan_empty(): Empty block at 0x01d802c4 ends at 0x01d80338 (with
0xbfffffff)! Marking dirty
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01d80338: 0xffff
instead
jffs2_scan_empty(): Empty block at 0x01d8033c ends at 0x01d80404 (with
0xefffffff)! Marking dirty
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01d80404: 0xffff
instead
jffs2_scan_empty(): Empty block at 0x01d80408 ends at 0x01d8041c (with
0xbfffffff)! Marking dirty
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01d8041c: 0xffff
instead
Further such events for this erase block will not be printed
ofs 0x01d81cc4 has already been seen. Skipping
ofs 0x01d83ff4 has already been seen. Skipping
ofs 0x01d869f4 has already been seen. Skipping
ofs 0x01d8f408 has already been seen. Skipping
ofs 0x01d8fc08 has already been seen. Skipping
ofs 0x01d927c8 has already been seen. Skipping
ofs 0x01d94574 has already been seen. Skipping
ofs 0x01d947b0 has already been seen. Skipping
ofs 0x01d9a9c0 has already been seen. Skipping
ofs 0x01d9a9c8 has already been seen. Skipping
ofs 0x01d9d8b4 has already been seen. Skipping
ofs 0x01da19bc has already been seen. Skipping
ofs 0x01da34bc has already been seen. Skipping
ofs 0x01da56f4 has already been seen. Skipping
ofs 0x01da97b4 has already been seen. Skipping
ofs 0x01dadeb4 has already been seen. Skipping
ofs 0x01dae9f8 has already been seen. Skipping
ofs 0x01daefbc has already been seen. Skipping
ofs 0x01db49bc has already been seen. Skipping
ofs 0x01db57fc has already been seen. Skipping
ofs 0x01db6220 has already been seen. Skipping
ofs 0x01dbcbd4 has already been seen. Skipping
JFFS2: Erase block at 0x01d80000 is not formatted. It will be erased
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 60K
waiting for erase to complete timed out. Xstatus = 1600080, status = eb7d0080.
Erase at 0x01d80000 failed immediately: -5
kmod: runaway modprobe loop assumed and stopped
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
modprobe: modprobe: Can't open dependencies file
/lib/modules/2.4.3-rmk2-np1/modules.dep (No such file or directory)
Executing /linuxrc...
Loading floating point emulator...
Using /lib/modules/2.4.3-rmk2-np1/kernel/arch/arm/nwfpe/nwfpe.o
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
Mounting /proc
Loading Unix socket support
Using /lib/modules/2.4.3-rmk2-np1/kernel/net/unix/unix.o
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Setting up RAMFS, please wait...
Using /lib/modules/2.4.3-rmk2-np1/kernel/fs/ramfs/ramfs.o
Setting Date/Time from previous settings
Mon Jan 1 00:00:00 UTC 2001
Executing /sbin/init...
INIT: version 2.78 booting
Mounting local filesystems...
mount: ramfs already mounted on /mnt/ramfs
devpts on /dev/pts type devpts (rw,mode=0622)
mount: proc already mounted
Chip not ready for buffer write. Xstatus = 280080, status = a80080
Write of 68 bytes at 0x00ceb6c0 failed. returned 0, retlen 0
Not marking the space at 0x00ceb6c0 as dirty because the flash driver
returned retlen zero
touch: setting times of `/etc/modules.conf': Input/output error
Calculating module dependencies... Node CRC 454f0080 != calculated CRC
c2d06f6c for node at 002a1e14
/etc/rcS.d/S10modutils: /sbin/depmod: Input/output error
done.
Loading modules: Node CRC d0ac0080 != calculated CRC c8670a5e for node at
004e95c4
/etc/rcS.d/S10modutils: /bin/cat: Input/output error

Node CRC 6db20080 != calculated CRC c8dcc449 for node at 002a98f8
CRC failed for read_inode of inode 2 at physical location 0x70
/etc/rcS.d/S10modutils: modprobe: command not found
CRC failed for read_inode of inode 1801 at physical location 0x18a1f3c
CRC failed for read_inode of inode 1760 at physical location 0x1892ce8
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node totlen on flash (0x00000080) != totlen in node ref (0x0000007c)
CRC failed for read_inode of inode 782 at physical location 0xcd70a8
INIT: can't open(/etc/ioctl.save, O_WRONLY): Input/output error
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: can't open(/etc/ioctl.save, O_WRONLY): Input/output error
INIT: Entering runlevel: 2
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node totlen on flash (0x00000080) != totlen in node ref (0x0000046c)
CRC failed for read_inode of inode 1773 at physical location 0x1896244
INIT: cannot execute "/etc/init.d/rc"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node totlen on flash (0x00000080) != totlen in node ref (0x000006f0)
Node totlen on flash (0x00000080) != totlen in node ref (0x00000a08)
Node totlen on flash (0x00000080) != totlen in node ref (0x000009e8)
Node totlen on flash (0x00000080) != totlen in node ref (0x000001c8)
CRC failed for read_inode of inode 1795 at physical location 0x18a17e8
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: cannot execute "/sbin/getty"
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
Node CRC 51fd0080 != calculated CRC 18ec9b8f for node at 002eb64c
INIT: Id "T0" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
Received on Mon Jul 30 01:12:03 2001