Re: Problem installing

Is this from osloader?

If so:

peek flash 0 (you want to see EA00008E)
peek flash 0x20 (you want to see 646C7462)

If both of those values are correct, reset and do the protection
again after you are back into the bootldr.

If these values don't match:

set override 1
eflash 0

If this goes smoothly, load bootldr again.

If you get an error:

set noerase 1

Then load bootldr again.

Ken Causey (nikos)

At 01:28 PM 5/24/01 -0500, Ward, Jonathan wrote:
>Here is what I see. The md5's are correct but ....
>
>boot> load bootldr
>loading flash region bootldr
>using xmodem
>ready for xmodem download..
>Download Successful
>00018980 bytes loaded to C0000400
>BSD sum value is: 00000000
>
>programming flash...erasing ...
>Erasing sector 00000000
> len=00018980
>writing flash..
>addr: 00000000 data: EA00008E
>addr: 00010000 data: E1A0C00D
>verifying ... done.
>boot> pflash 0 0xffff 1
> addr=00000000
> len=0000FFFF
> protect=00000001
>Protecting sector 00000000
>boot> qflash 2
>value = 00000000
Received on Thu May 24 11:41:35 2001