Fw: [iPAQ] PCMCIA config woes

Ellen,

 I have familiar 0.4 and Orinoco silver with RG 1000 and it's working just
 fine.

 I had to edit the following files:

 network.opts (to configure my ip-address, gateway, dns server settings +
 disable pump and dhcp)
 config.opts (to uncomment module wvlan_cs and add some options
port_type,
 channel, network name)
 wireless.opts (to remove "SECTION TO REMOVE" and change the first 3 hex no
 of the mac address, change ESSID change mode to Managed and add the enc.
 key)

 As I can remeber you are using 192.168.1.x addresses and you have tried to
 ping internet address - do you have some sort of NAT (address translation)
 in place and/or is your routing in place to?

 good luck

 Elvir

> Motto: Linux is like a wigwam - no windows, no gates, apache inside!
> ----- Original Message -----
> From: "Ellen Dash" <edash_dgi@hotmail.com>
> To: <ipaq@handhelds.org>
> Sent: Wednesday, May 23, 2001 6:09 PM
> Subject: [iPAQ] PCMCIA config woes
>
>
> > I am using Familiar 0.3 and I am not able to get my Wavelan card (Lucent
> > Orinoco PC Silver) configured correctly to reach the outside world. I
am
> > trying to get it to talk to my Linksys wireless AP/router which is in
turn
> > connected to a cable modem.
> >
> > If anyone has been successful with this, would you please let me know.
> I'm
> > sure that I'm just missing a trick or two.
> >
> > Many thanks,
> >
> > Ellen Dash
> > edash_dgi@hotmail.com
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> > _______________________________________________
> > iPAQ mailing list
> > iPAQ@handhelds.org
> > http://handhelds.org/mailman/listinfo/ipaq
> >
>
Received on Wed May 23 11:39:11 2001