Hi,
I have installed familiar 0.5.2 release in my ipaq h3850 PDA.
And I have installed wlan-ng-2.4.18-rmk3_0.1.14-2_arm.ipk in my ipaq PDA by removing some file first.(wlan-ng.conf wlan-ng.opt ...)
Then I type insmod prism2.o to install driver module.
Now I have problem for making my wireless card work.
When I insert the card,the following error message is shown.
--------------------------------------------
server: card send
cardmgr[84]: socket 0: IEEE 802.11 Wireless LAN/CF Card
cardmgr[84]: executing: 'modprobe prism2_cs'
init_module: prism2_cs.o: 0.1.14 Loaded
init_module: dev_info is: prism2_cs
prism2_cs: GetNextTuple: No more items
prism2sta_config: NextTuple failure? It's probably a Vcc mismatch.
prism2sta_event: prism2_cs: Initialization failed!
cardmgr[84]: get dev info on socket 0 failed: Resource temporarily unavailable
----------------------------------------------
my wireless card infomation is as the following:
------------------------------------------------
# cardctl ident
Socket 0:
product info: "AmbiCom", "WL1100C 802.11b CF-Card", "2.2"
manfid: 0xd601, 0x0002
function: 6 (network)
Socket 1:
no product info available
-----------------------------------------------
And I have tried to insert card info into /etc/pcmcia/wlan-ng.conf
-------------------------------------------------
card "IEEE 802.11 Wireless LAN/CF Card"
manfid 0xd601, 0x0005
bind "prism2_cs"
------------------------------------------------
Would anyone help me? Thank you very much!
Sincerely, Chi-Ching Huang
Received on Tue Apr 01 13:46:40 2003
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:37:21 EDT