From: Rainer Kukasch (rk@sicom.de)
Date: Wed Mar 20 2002 - 07:35:13 EST
Hello,
there are two issues with bootldr 2.18.22:
1) Everytime I power on (resume) Windows CE (PocketPC 2002), the ipaq does a soft reset (Linux does not).
2) bootldr can't read the partition table of my 128MB CF card, which
I partitioned and formatted with a digicam. See attached log file.
With a 48MB card I could succesfully boot linux.
Best regards
Rainer Kukasch
U3
@00000408
F02000000
*MTST
00000001
00000002
00000004
00000008
00000010
00000020
00000040
00000080
00000100
00000200
00000400
00000800
00001000
00002000
00004000
00008000
00010000
00020000
00040000
00080000
00100000
00200000
00400000
00800000
01000000
02000000
04000000
08000000
10000000
20000000
40000000
80000000
ENDM
STKP
C19F3FFC
MMU table start=C19F4000
Boot data start=C19F8000
Boot data size=00008000
Stack data base=C19F0000
Stack data size=00004000
FLASH_BASE=00000000
Evacuating 1MB of Flash to DRAM at: C1E00000
done
Map Flash virtual section to DRAM at: C1E00000
verify flash size...
btflash_init: mfrid=00890089
devid=00170017
walking flash descriptors (2x16)
btflash_init: found flash 28F640J3A
flashDescriptor=00028EA8
flashSectors=00028DA4
nsectors=00000040
flash_size=01000000
flash_address_mask=00FFFFFF
mach_type ->00000016
allocated partition_table
defining partition: bootldr
defining partition: root
h3600_sleeve_init_module
h3600_generic_pcmcia_init_module: registering sleeve drivers
registering sleeve driver 0002D9B4
registering sleeve driver 0002DA00
registering sleeve driver 0002D968
Probing bank0 memory size...
bank0 memory size=02000000
SDRAM size: 0x02000000
in megs: 32M
Disabling LCD controller
Disabling LCD controller
Enabling LCD controller
before EN
after EN
after EGPIO
DBAR1=C1E364E0
LCCR0=000000B9
LCCR1=0B100930
LCCR2=0A0108F0
LCCR3=00300010
params=0x00029368
>> Compaq OHH BootLoader, Rev 2-18-22 [BIG_KERNEL] [MD5] [MONO]
>> 02-03-15_11:06
>> Last link date: Fri Mar 15 11:06:08 EST 2002
>> Contact: bootldr@handhelds.org
>> StrongARM SA-1110 revision B2
>> (c) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY under the terms of the GNU General Public License.
>> See http://www.handhelds.org/bootldr/ for full license and sourcesPress Return to start the OS now, any other key for monitor menu
DEBUG BOOT: not evaluating params
DEBUG BOOT: use `params eval' to evaluate parameters.
boot> boot vfat
booting vfat...
h3600_sleeve_insert: no spi read, defaulting sleeve vendor
h3600_sleeve_insert: no spi read, defaulting sleeve deviceid
sleeve vendorid=00001125
sleeve deviceid=0000D7C3
pcmcia_probe_sleeve
probing for dual pcmcia sleeve
dual_pcmcia_linkup[0]->prc=00000000
pcmcia_register_ops: ops=0002D9D4
h3600_sleeve_insert: matched driver Compaq PC Card Sleeve
cis mapping=28000000
cis[0] =00000000
end
cis mapping=38000000
cis[0] =00000C02
end
cmd vfat mount: partid=00000000
vfat mount: reading bpb_info
Reading params from file: /boot/params
vfat_find_file_entry: fname='boot/params'
dirname='boot'
basename='params'
vfat_find_dir_entry: fname='boot'
dirname=''
basename='boot'
searching root_dir_entries
Reading kernel from file: boot/zImage
vfat_find_file_entry: fname='boot/zImage'
dirname='boot'
basename='zImage'
vfat_find_dir_entry: fname='boot'
dirname=''
basename='boot'
searching root_dir_entries
read zimage failed rc=FFFFFFFE
boot> boot vfat
booting vfat...
h3600_sleeve_insert: no spi read, defaulting sleeve vendor
h3600_sleeve_insert: no spi read, defaulting sleeve deviceid
sleeve vendorid=00001125
sleeve deviceid=0000D7C3
pcmcia_probe_sleeve
probing for dual pcmcia sleeve
dual_pcmcia_linkup[0]->prc=00000000
pcmcia_register_ops: ops=0002D9D4
h3600_sleeve_insert: matched driver Compaq PC Card Sleeve
cis mapping=28000000
cis[0] =00000101
01 03 D9 01 FF 1C 04 03 D9 01 FF 18 02 DF 01 20 04 00 00 00 00 15 20 04 01 52 69 74 65 6B 20 43 6F 72 70 6F 72 61 74 69 6F 6E 20 20 20 56 65 72 31 2E 30 30 20 00 FF 21 02 04 01 22 02 01 01 22 03 02 0C 0F 1A 05 01 03 00 02 0F 1B 08 C0 C0 A1 01 55 08 00 20 1B 06 00 01 21 B5 1E 4D 1B 0A C1 41 99 01 55 64 F0 FF FF 20 1B 06 01 01 21 B5 1E 4D 1B 0F C2 41 99 01 55 EA 61 F0 01 07 F6 03 01 EE 20 1B 06 02 01 21 B5 1E 4D 1B 0F C3 41 99 01 55 EA 61 70 01 07 76 03 01 EE 20 1B 06 03 01 21 B5 1E 4D 14 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 80 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cis mapping=38000000
cis[0] =00000000
end
cmd vfat mount: partid=00000000
vfat mount: reading bpb_info
Reading params from file: /boot/params
vfat_find_file_entry: fname='boot/params'
dirname='boot'
basename='params'
vfat_find_dir_entry: fname='boot'
dirname=''
basename='boot'
searching root_dir_entries
Reading kernel from file: boot/zImage
vfat_find_file_entry: fname='boot/zImage'
dirname='boot'
basename='zImage'
vfat_find_dir_entry: fname='boot'
dirname=''
basename='boot'
searching root_dir_entries
read zimage failed rc=FFFFFFFE
boot>
This archive was generated by hypermail 2.1.5 : Fri Jan 17 2003 - 17:47:03 EST