From: Kevin Gustavson (gust@FoxValley.net)
Date: Wed Mar 13 2002 - 15:25:44 EST
Thanks, rebooting cured my problem.
I checked out the instructions and they did mention rebooting
at this point. This didn't make much sense to me when I had
initially read it so I had forgotten.
Thanks, I am much relieved.
Kevin Gustavson
On Wed, 13 Mar 2002, Hicks, Jamey wrote:
>
> > -----Original Message-----
> > From: Kevin Gustavson [mailto:gust@FoxValley.net]
> > Sent: Wednesday, March 13, 2002 2:25 PM
> > To: bootldr@handhelds.org
> > Subject: [Bootldr] BootBlaster 1.18 froze while flashing
> >
> >
> > I have a problem...
> >
> > I am using BootBlaster 1.18 to flash bootldr 2.18.16 to my
> > iPAQ 3835. The iPAQ appears to be frozen.
> >
> > I have 5 blue boxes on the progress bar and it says
> > "Protecting Wince Partions..." at the top. The clock has
> > not changed, still says 1:08pm, and it is not responding
> > to taps.
> >
> As it says at step 15 of: ftp://ftp.handhelds.org/pub/linux/compaq/ipaq/stable/install.html
>
> Sometimes BootBlaster freezes at this point. If it sits for more than 15 seconds with no activity, then reboot the iPAQ by pushing the recessed reset button at the bottom right and repeat this step.
>
> Jamey
>
This archive was generated by hypermail 2.1.5 : Fri Jan 17 2003 - 17:47:03 EST