From: Hicks, Jamey (Jamey.Hicks@compaq.com)
Date: Thu Jan 24 2002 - 08:14:07 EST
Horea,
bootldr 2.18.01, available from
ftp://lorien.handhelds.org/pub/linux/feeds/bootldr-2.18.01.bin lets you
transfer a gzipped wince image in a single chunk.
How did you produce the ROM image?
Jamey
> -----Original Message-----
> From: Horea Bacila [mailto:hbacila@worldlinkits.com]
> Sent: Thursday, January 24, 2002 8:24 AM
> To: Hicks, Jamey
> Subject: Re: [Bootldr] Bootldr problems
>
>
> Thanks a lot.
>
> I managed to regain access to the boot> promt. Now..I would
> like to transfer
> the 16Mb wince ROM image. I know that it must be transfered
> in 4 chunks. On
> the instructions is specified only a way of spliting the big
> file using
> Linux command dd...I have a Windows split shell extension...
> Do you know
> other way of doing this under Windows..without having
> problems when loading
> to falsh?
>
> Thank you again...
>
> Horea
>
>
>
> Type a space key on your terminal emulator, followed by the enter key.
> If that does not work, press and hold the center of the joypad (the
> Action button), then push the recessed reset button, then release the
> action button after the ipaq is back in the cradle. This
> will force it
> to go directly to the boot> prompt.
>
> Jamey
>
>
>
> > -----Original Message-----
> > From: Horea Bacila [mailto:hbacila@worldlinkits.com]
> > Sent: Thursday, January 24, 2002 8:10 AM
> > To: bootldr@handhelds.org
> > Subject: [Bootldr] Bootldr problems
> >
> >
> > Hi there,
> >
> > I tried to restore Pocket PC on an iPag 3630 from Linux. I
> > followed the
> > instructions on your web site. Unfortunately I had to load a
> > newer version
> > of booldr on it in order to transfer the wince image. I loaded
> > bootldr-2.17.12. After I transfered the new bootldr on the
> device with
> > boot>load bootldr..nothing happened on the terminal..so I
> > reset it. It came
> > with a screen saying
> >
> > Press button for action:
> >
> > Calendar --> serial bootldr console
> > Q (or wait) --> boot Linux.
> >
> > The problem is that nothing is happening even if I press
> the buttons.
> >
> > Could you help me with this? I hope that I didn't make it
> > unusable. :((
> >
> > With many thanks,
> > Horea Bacila
> >
> > sr. software engineer
> > Worldlink ITS
> > www.worldlinkits.com
> >
> >
> > _______________________________________________
> > Bootldr mailing list
> > Bootldr@handhelds.org
> > http://handhelds.org/mailman/listinfo/bootldr
> >
>
>
This archive was generated by hypermail 2.1.5 : Fri Jan 17 2003 - 17:47:03 EST