From: Petr Olivka (petr.olivka@vsb.cz)
Date: Wed Feb 26 2003 - 05:05:23 EST
with CF jacket, or with dual PCMCIA jacket, the same result.
now I have bootloader 2.18.54. And here is result:
boot> sleeve insert
h3600_sleeve_init_module
h3600_generic_pcmcia_init_module: registering sleeve drivers
registering sleeve driver 000311BC
registering sleeve driver 00031208
registering sleeve driver 00031170
h3600_sleeve_insert: no spi read, defaulting sleeve vendor
h3600_sleeve_insert: no spi read, defaulting sleeve deviceid
sleeve vendorid=00001125
sleeve deviceid=0000D7C3
pcmcia_probe_sleeve
probing for dual pcmcia sleeve
dual_pcmcia_linkup[0]->prc=000019B0
dual_pcmcia_probe_sleeve
pcmcia_register_ops: ops=00031144
h3600_sleeve_insert: matched driver Compaq PC Card Sleeve
boot> pcmcia insert
cis mapping=28000000
cis[0] =00000001
01 03 D9 01 FF
1C 04 03 D9 01 FF
18 02 DF 01
20 04 00 00 00 00
manfid[0]=00000000
manfid[1]=00000000
15 20 04 01 43 46 20 43 61 72 64 00 43 46 41 20 36 34 4D 42 20 43 54 53
00 20 20 20 00 34 2E 30 00 FF
21 02 04 01
funcid=00000004
fixed disk
22 02 01 01
22 03 02 0C 0F
1A 05 01 03 00 02 0F
1B 08 C0 C0 A1 01 55 08 00 20
1B 06 00 01 21 B5 1E 4D
1B 0A C1 41 99 01 55 64 F0 FF FF 20
1B 06 01 01 21 B5 1E 4D
1B 0F C2 41 99 01 55 EA 61 F0 01 07 F6 03 01 EE 20
1B 06 02 01 21 B5 1E 4D
1B 0F C3 41 99 01 55 EA 61 70 01 07 76 03 01 EE 20
1B 06 03 01 21 B5 1E 4D
end
serial_number: 2217C17AB2490010
firmware_revision: 4.0
model_number: 64MB CTS
n_sectors_user_addressable=00000000
bytes_per_sector=00000210
major_version=00000000
minor_version=00000000
flags=0000848A
ACTUAL bytes_per_sector=00000200
cis mapping=38000000
cis[0] =00000002
00 B5 00 FF 00 00 00 00 00 F7 00 00 00 00 00 00 00 00 00 00 00 00 00 00
FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00 FF 00 00
00 00 00 FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 FF 00
00 00 00 00 00 00 00 41 00 00 FF 00 00 FB 00 00 00 00 00 00 00 00 00 00
00 FF 00 00 00 00 00 00 00 00 FF 00 00 FF 00 00 00 00 00 00 00 00 00 00 00
FF 00 00 00 00 00 00 00 00 00 0
0 00 00 00 00
end
boot> ide debug
ide_debug = 00000001
boot> ide verbose
ide_verbose = 00000001
boot> ide ptable
start_cylinder=00000000
start_head=00000000
start_sector=00000000
sector_count=00000001
ide read: status reg=00000058
ide read: error reg=00000000
ptable signature=0000AA55
C19F3D0C: 00 00 01 03 06 00 A0 00-20 00 00 00 60 00 01 00 | ........
...`...
C19F3D1C: 00 01 81 03 06 E8 E0 00-80 00 01 F4 00 00 00 00 |
................
C19F3D2C: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 |
................
C19F3D3C: 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 AA |
................
boot> vfat mount 0
cmd vfat mount: partid=00000000
vfat mount: reading bpb_info
start_cylinder=00000000
start_head=00000000
start_sector=00000020
sector_count=00000001
ide read: status reg=00000058
ide read: error reg=00000000
SWI
0001951C
4008401C
.... and now I have black screen and I have to have reset iPaq....
When I mount this card later in familiar, then all is ok.
poli
> Use "ide debug" and "ide verbose" to enable more debugging information,
> and post the resulting trace. That might help to isolate where things
> are going wrong.
>
> p.
>
> On Wed, 2003-02-26 at 08:54, Petr Olivka wrote:
> > Hi !
> >
> > I have still problem use my CF 64MB card in boot process. Everytime
> > process finish with message:
> >
> > vfat mount: reading bpb_info
> >
> > and froze.
> >
> > With 128MB Pretec CF all work fine.
> >
> > I did test 2.18.54, 2.18.55 and 2.19.30 and 2.19.58.
> >
> > How to diagnose this problem ?
>
>
>
>
This archive was generated by hypermail 2.1.5 : Wed Feb 26 2003 - 05:05:34 EST