From: Hicks, Jamey (Jamey.Hicks@hp.com)
Date: Wed Aug 07 2002 - 08:08:20 EDT
the older bootldr source required current linux kernel source code configured for the iPAQ. Actually, to get all the relevant bits you had to run make zImage.
The current bootldr source code no longer requires linux kernel source code in order to build it.
The latest stable bootldr is 2.18.48 and there is a tarball and binaries for this in
http://www.handhelds.org/feeds/bootldr
I'm also interested in knowing what changes you are making to the bootldr.
Thanks,
Jamey
> -----Original Message-----
> From: Laurent Petit [mailto:petit@ri.silicomp.fr]
> Sent: Tuesday, August 06, 2002 10:28 AM
> To: bootldr@handhelds.org
> Subject: [Bootldr] Cross-compiling BootLoader 2.18.0.1
>
>
>
> Trying to cross-compile BootLoader 2.18.0.1 with
> Toochains downloaded from
>
> ftp://ftp.handhelds.org/pub/linux/arm/toolchain/
>
> ftp://ftp.handhelds.org/pub/linux/arm/toolchain/jacques
>
> The Georges France 's toolchain give me
>
> --------------------------------------------------------------
> ------------------
> lcd.c: In function `sa1100fb_enable_lcd_controller':
> lcd.c:125: `GPIO_H3800_ASIC1_LCD_5V_ON' undeclared
> (first use in this
> function)
> lcd.c:125: (Each undeclared identifier is reported only once
> lcd.c:125: for each function it appears in.)
> lcd.c:126: `GPIO_H3800_ASIC1_LCD_ON' undeclared (first
> use in this function)
> lcd.c:127: `GPIO_H3800_ASIC1_LCD_PCI' undeclared (first
> use in this function)
> lcd.c:128: `GPIO_H3800_ASIC1_VGH_ON' undeclared (first
> use in this function)
> lcd.c:128: `GPIO_H3800_ASIC1_VGL_ON' undeclared (first
> use in this function)
> lcd.c: In function `command_splash':
> lcd.c:804: warning: implicit declaration of function
> `splash_file'
> make: *** [lcd.o] Error 1
> --------------------------------------------------------------
> -------------------
>
> The Jacques'one
> --------------------------------------------------------------
> ------------------
> arm-linux-gcc: installation problem, cannot exec
> `cpp0': No such file
> or directory
> --------------------------------------------------------------
> -------------------
>
>
> I used a linux-rmk3-hh10 distribution for the iPaq
> H3870, it may not be
> the same for cross-compiling BootLoader 2.18.0.1. or others...
>
>
> What are the linux library used and the toolchains in order
> to get the same
> binary of BootLoader 2.x.x. as the ones dowloaded on :
>
> ftp://ftp.handhelds.org/pub/linux/compaq/ipaq/v0.30/
> _______________________________________________
> Bootldr mailing list
> Bootldr@handhelds.org
> http://handhelds.org/mailman/listinfo/bootldr
>
This archive was generated by hypermail 2.1.5 : Fri Jan 17 2003 - 17:47:04 EST