From: Alan B. Clegg (alan@clegg.com)
Date: Wed Jun 12 2002 - 14:12:45 EDT
Jamey and Boot Loader gurus,
I'm trying to get a 5GB Toshiba drive working (dual-boot scenario) with
an iPAQ 3835.
When I attempt to boot from the drive (Boot VFAD HDD/CF option), I get this:
--SNIP--
>> Compaq OHH BootLoader, Rev 2-18-48 [BIG_KERNEL] [MD5] [MONO]
>> 02-06-07_10:14
>> Last link date: Fri Jun 7 10:15:09 EDT 2002
>> Contact: bootldr@handhelds.org
>> StrongARM SA-1110 revision B4
>> (c) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY under t.
>> See http://www.handhelds.org/bootldr/ for full license and sourcesPress Retuu
DEBUG BOOT: not evaluating params
DEBUG BOOT: use `params eval' to evaluate parameters.
boot> boot vfat
h3600_sleeve_init_module
h3600_generic_pcmcia_init_module: registering sleeve drivers
registering sleeve driver 000311D4
registering sleeve driver 00031220
registering sleeve driver 00031188
h3600_sleeve_insert: no spi read, defaulting sleeve vendor
h3600_sleeve_insert: no spi read, defaulting sleeve deviceid
sleeve vendorid=00001125
sleeve deviceid=0000D7C3
pcmcia_probe_sleeve
probing for dual pcmcia sleeve
dual_pcmcia_linkup[0]->prc=000019B0
dual_pcmcia_probe_sleeve
pcmcia_register_ops: ops=0003115C
h3600_sleeve_insert: matched driver Compaq PC Card Sleeve
cis mapping=28000000
cis[0] =00000001
01 03 DC 01 FF
1C 04 03 DC 01 FF
18 02 DF 01
20 04 98 00 00 00
manfid[0]=00000098
manfid[1]=00000000
15 15 04 01 54 4F 53 48 49 42 41 00 4D 4B 35 30 30 32 4D 50 4C 00 FF
21 02 04 01
funcid=00000004
fixed disk
22 02 01 01
22 03 02 08 1F
1A 05 01 07 00 02 0F
1B 0B C0 C0 A1 71 55 46 56 65 08 00 20
1B 06 00 01 21 B5 1E 56
1B 0D C1 41 99 71 55 46 56 65 64 F0 FF FF 20
1B 06 01 01 21 B5 1E 56
1B 12 C2 41 99 71 55 46 56 65 EA 61 F0 01 07 F6 03 01 EE 20
1B 06 02 01 21 B5 1E 56
1B 12 C3 41 99 71 55 46 56 65 EA 61 70 01 07 76 03 01 EE 20
1B 06 03 01 21 B5 1E 56
end
serial_number: 71I75808 A
firmware_revision: V2.10 A
model_number: TOSHIBA MK5002MPL
n_sectors_user_addressable=00000000
bytes_per_sector=00000200
major_version=00000000
minor_version=00000000
flags=0000045A
ACTUAL bytes_per_sector=00000200
cis mapping=38000000
cis[0] =00000002
end
ptable signature=0000AA55
cmd vfat mount: partid=00000000
vfat mount: reading bpb_info
oemname=*Xr[RIHC
******** malloc out of storage ********
size=004AB200
--SNIP--
Followed by a hard hang.
Under familiar (booted from flash or from a 128MB CF card), I get this:
--SNIP--
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Trying to free nonexistent resource <c4916000-c491600f>
hda: TOSHIBA MK5002MPL, ATA DISK drive
ide0 at 0xc4916000-0xc4916007,0xc491600e on irq 42
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: 9818550 sectors (5027 MB) w/212KiB Cache, CHS=10390/15/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
--SNIP--
and, when mounted, it shows up just fine:
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/mtdblock/1 32256 19504 12752 61% /
tmpfs 31500 992 30508 4% /mnt/ramfs
/dev/hda1 4890216 62572 4827644 2% /mnt/hda
Thanks for any help you can provide on this,
AlanC
--
| Alan Clegg | Networks | Security | UNIX | 802.11 |
perl -le '$_="6110>374086;2064208213:90<307;55";tr[0->][ LEOR\!AUBGNSTY];print'
This archive was generated by hypermail 2.1.5 : Fri Jan 17 2003 - 17:47:04 EST