Query on bootldr problem

Jamey and Boot Loader gurus,

I'm trying to get a 5GB Toshiba drive working (dual-boot scenario) with
an iPAQ 3835.

When I attempt to boot from the drive (Boot VFAD HDD/CF option), I get this:

--SNIP--
>> Compaq OHH BootLoader, Rev 2-18-48 [BIG_KERNEL] [MD5] [MONO]
>> 02-06-07_10:14
>> Last link date: Fri Jun 7 10:15:09 EDT 2002
>> Contact: bootldr_at_handhelds.org

>> StrongARM SA-1110 revision B4
>> (c) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY under t.
>> See http://www.handhelds.org/bootldr/ for full license and sourcesPress Retuu
DEBUG BOOT: not evaluating params
DEBUG BOOT: use `params eval' to evaluate parameters.
boot> boot vfat
h3600_sleeve_init_module
h3600_generic_pcmcia_init_module: registering sleeve drivers
registering sleeve driver 000311D4
registering sleeve driver 00031220
registering sleeve driver 00031188
h3600_sleeve_insert: no spi read, defaulting sleeve vendor
h3600_sleeve_insert: no spi read, defaulting sleeve deviceid
 sleeve vendorid=00001125
 sleeve deviceid=0000D7C3
pcmcia_probe_sleeve
  probing for dual pcmcia sleeve
  dual_pcmcia_linkup[0]->prc=000019B0
dual_pcmcia_probe_sleeve
pcmcia_register_ops: ops=0003115C
h3600_sleeve_insert: matched driver Compaq PC Card Sleeve
cis mapping=28000000
cis[0] =00000001
  01 03 DC 01 FF
  1C 04 03 DC 01 FF
  18 02 DF 01
  20 04 98 00 00 00
  manfid[0]=00000098
  manfid[1]=00000000
  15 15 04 01 54 4F 53 48 49 42 41 00 4D 4B 35 30 30 32 4D 50 4C 00 FF
  21 02 04 01
  funcid=00000004
    fixed disk
  22 02 01 01
  22 03 02 08 1F
  1A 05 01 07 00 02 0F
  1B 0B C0 C0 A1 71 55 46 56 65 08 00 20
  1B 06 00 01 21 B5 1E 56
  1B 0D C1 41 99 71 55 46 56 65 64 F0 FF FF 20
  1B 06 01 01 21 B5 1E 56
  1B 12 C2 41 99 71 55 46 56 65 EA 61 F0 01 07 F6 03 01 EE 20
  1B 06 02 01 21 B5 1E 56
  1B 12 C3 41 99 71 55 46 56 65 EA 61 70 01 07 76 03 01 EE 20
  1B 06 03 01 21 B5 1E 56
end
  serial_number: 71I75808 A
  firmware_revision: V2.10 A
  model_number: TOSHIBA MK5002MPL
  n_sectors_user_addressable=00000000
  bytes_per_sector=00000200
  major_version=00000000
  minor_version=00000000
  flags=0000045A
  ACTUAL bytes_per_sector=00000200
cis mapping=38000000
cis[0] =00000002
end
ptable signature=0000AA55
cmd vfat mount: partid=00000000
vfat mount: reading bpb_info
  oemname=*Xr[RIHC

******** malloc out of storage ********
  size=004AB200
--SNIP--

Followed by a hard hang.

Under familiar (booted from flash or from a 128MB CF card), I get this:

--SNIP--
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Trying to free nonexistent resource <c4916000-c491600f>
hda: TOSHIBA MK5002MPL, ATA DISK drive
ide0 at 0xc4916000-0xc4916007,0xc491600e on irq 42
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: 9818550 sectors (5027 MB) w/212KiB Cache, CHS=10390/15/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1
--SNIP--

and, when mounted, it shows up just fine:

Filesystem 1k-blocks Used Available Use% Mounted on
/dev/mtdblock/1 32256 19504 12752 61% /
tmpfs 31500 992 30508 4% /mnt/ramfs
/dev/hda1 4890216 62572 4827644 2% /mnt/hda

Thanks for any help you can provide on this,
AlanC

-- 
               | Alan Clegg | Networks | Security | UNIX | 802.11 | 
perl -le '$_="6110>374086;2064208213:90<307;55";tr[0->][ LEOR\!AUBGNSTY];print'