Received on Wed May 03 2006 - 13:34:22 EDTOn Wed, 2006-05-03 at 14:00 +0200, JeDi wrote:It is a driver problem. We don't have one yet :-)Okey Dokey, Doing a little bit of digging here. Got a GPE based x50v image similar to JeDi's, which has root password set and updated modules to match JeDi's kernel. I will put it up for download later if anyone is interested. My digging started when I tried to manually start GDM from the command line, I got this output: Unable to open /dev/touchscreen/0 So I went and searched the config that the kernel is built with and found this: CONFIG_INPUT_TOUCHSCREEN is not set JeDi, could you enable this and rebuild your kernel? I want to see if /dev/touchscreen appears. Also, the compactflash relies on the pxa2xx_core module, but no matter how I insert and remove modules or cards, I get no success with it. Also, is anyone else getting similar panics with their axim x50v? : Pid: 2038, comm: klogd CPU: 0 PC is at do_syslog+0x1d0/0x500 LR is at do_syslog+0x1f4/0x500 pc : [<c0037ca0>] lr : [<c0037cc4>] Not tainted sp : c1257f44 ip : c022efc4 fp : c1257f94 r10: c022efcc r9 : 00000a5a r8 : bef10856 r7 : 00001000 r6 : c1256000 r5 : 00000000 r4 : 00000031 r3 : 80000013 r2 : c022f054 r1 : 0002059e r0 : 0002059d Flags: Nzcv IRQs on FIQs on Mode SVC_32 Segment user Control: 397F Table: A9374000 DAC: 00000015 [<c0022df4>] (show_regs+0x0/0x4c) from [<c0021bf0>] (report_bad_irq +0x6c/0xcc) r4 = C1257EFC [<c0021b84>] (report_bad_irq+0x0/0xcc) from [<c0021f1c>] (do_level_IRQ +0x80/0xb8) r5 = 00000017 r4 = C022A1C4 [<c0021e9c>] (do_level_IRQ+0x0/0xb8) from [<c0021fa4>] (asm_do_IRQ +0x50/0x13c) r6 = 00800000 r5 = C1257F30 r4 = C1256000 [<c0021f54>] (asm_do_IRQ+0x0/0x13c) from [<c0020998>] (__irq_svc +0x38/0x70) [<c0037ad0>] (do_syslog+0x0/0x500) from [<c0037fe0>] (sys_syslog +0x10/0x14) [<c0037fd0>] (sys_syslog+0x0/0x14) from [<c0020da0>] (ret_fast_syscall +0x0/0x2c) handlers: [<c014a694>] (pxamci_irq+0x0/0x1f4) Phil
This archive was generated by hypermail 2.2.0 : Wed May 03 2006 - 13:34:33 EDT