Re: Updated packages for x50 and x50v

I think it has to do with the difernece in RAM/ROM compared to the x50v's.
But lets focus on 50 series first and on 51 later

On 4/19/06, Angel Sánchez Morales <salemixu_at_gmail.com> wrote:
>
> Perhaps it uses another memory address than the x50v
> Try to get info about haret and compare it to the info on the x50(v)
>
> Christopher petzel wrote:
> > what do you think is causeing it to hang up like that for the x51v?
> > I think its a software problem my self.
> >
> > On 4/19/06, Jorge Schrauwen <jorge.schrauwen_at_gmail.com> wrote:
> >
> >>yeah i activated mirror mode, tried with and without
> >>
> >>
> >>On 4/19/06, Angel Sánchez Morales <salemixu_at_gmail.com> wrote:
> >>
> >>>Did you activate the mirror mode?
> >>>x50v and x51v are not much different, some day it must work :p
> >>>
> >>>Jorge Schrauwen wrote:
> >>>
> >>>>I tried it with a SD card on my x51v (broken digitizer),
> >>>>It just hangs afther pushing the button.
> >>>>
> >>>>On 4/19/06, *Angel Sánchez Morales* < salemixu_at_gmail.com
> >>>><mailto:salemixu_at_gmail.com>> wrote:
> >>>>
> >>>> The first impression is that it can't find the file "failed to
> load
> >>>> kernel \CF Card\zImage" and you have said that you have the file
> >>>> zImage.txt, so just rename it :p
> >>>>
> >>>>
> >>>> Christopher petzel wrote:
> >>>> > I have an Dell Axim x51v
> >>>> > is the Linux files compatible with it?
> >>>> > if so how would I load it?
> >>>> > I have a 6gb CF micro drive so space is not a problem. I put
> the
> >>>> > files in the CF card.
> >>>> >
> >>>> > the files are as followed
> >>>> >
> >>>> > aximx30_ts.c
> >>>> > aximx50-gpio.h
> >>>> > config.txt
> >>>> > default.txt
> >>>> > diff-source.txt
> >>>> > haret_uart.exe
> >>>> > initrd.gz
> >>>> > x50v-rootfs.img
> >>>> > zImage.txt
> >>>> >
> >>>> > but when I push the run button on the haret_uart.exe
> >>>> > it will give me this error.
> >>>> >
> >>>> > "failed to load kernel \CF Card\zImage"
> >>>> >
> >>>> > any suggestions?
> >>>> >
> >>>> > On 4/15/06, JeDi <jeroen.dierckx_at_gmail.com
> >>>> <mailto: jeroen.dierckx_at_gmail.com>> wrote:
> >>>> >
> >>>> >>Hi,
> >>>> >>
> >>>> >>I prepared an updated package, bot for x50 and x50v (I'm not
> sure
> >>
> >>the
> >>
> >>>> >>x50 one will work, I don't own one). Not much difference with
> the
> >>
> >>old
> >>
> >>>> >>one, except the usb link is set up in the kernel already, you
> can
> >>>> >>choose the ip address in the default.txt if you wish. It also
> >>>> tries to
> >>>> >>mount the rootfs through NFS (hardcoded at
> >>
> >>10.0.0.1:/home/x50v-root),
> >>
> >>>> >>but that doesn't work for me (but if it fails it tries to mount
> >>
> >>the
> >>
> >>>> >>rootfs from x50v-rootfs.img on the sd card as usual).
> >>>> >>
> >>>> >>The x50v files are here:
> >>>>
> >>
> >>http://lumumba.uhasselt.be/~jedi/x50v-linux/package/
> >>
> >><http://lumumba.uhasselt.be/~jedi/x50v-linux/package/ >
> >>
> >>>> >>The x50 files are here:
> >>>> http://lumumba.uhasselt.be/~jedi/x50-linux/package/
> >>>> >>Most x50 files are the same as x50v (symlinks), except for the
> >>>> kernel (zImage).
> >>>> >>
> >>>> >>I also put the files used to create the kernels online.
> >>>> >>For x50v:
> >>
> >>http://lumumba.uhasselt.be/~jedi/x50v-linux/
> >>
> >>>> >>For x50:
> >>
> >>http://lumumba.uhasselt.be/~jedi/x50-linux/
> >>
> >>>> >>Again, only the diff-source is different for x50.
> >>>> >>
> >>>> >>I also tar.bz2'd the two directories for smaller download.
> >>>> >>For x50v:
> >>
> >>http://lumumba.uhasselt.be/~jedi/x50v-linux.tar.bz2
> >>
> >>>> >>For x50:
> >>
> >>http://lumumba.uhasselt.be/~jedi/x50-linux.tar.bz2
> >>
> >>>> >>
> >>>> >>Enjoy!
> >>>> >>
> >>>> >>Greetz,
> >>>> >>JeDi
> >>>> >>--
> >>>> >>_______________________________________________
> >>>> >>Aximx50-port mailing list
> >>>> >> Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>
> >>>>
> >>>>https://www.handhelds.org/mailman/listinfo/aximx50-port
> >>>> >>
> >>>> >
> >>>> >
> >>>> >
> >>>> > --
> >>>> > The box said "requires Microsoft Windows xp or higher" so I
> >>>> installed Linux.
> >>>> >
> >>>> > With Linux and Mac OS together they will throw down the evil
> >>>> empire of
> >>>> > Microsoft.
> >>>> --
> >>>> _______________________________________________
> >>>> Aximx50-port mailing list
> >>>> Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>
> >>>>
> >>https://www.handhelds.org/mailman/listinfo/aximx50-port
> >>
> >>>>
> >>>>
> >>>>
> >>>>--
> >>>>~Jorge
> >>>>
> >>>
> >>>--
> >>>_______________________________________________
> >>>Aximx50-port mailing list
> >>>Aximx50-port_at_handhelds.org
> >>>https://www.handhelds.org/mailman/listinfo/aximx50-port
> >>>
> >>
> >>
> >>
> >>--
> >>~Jorge
> >>--
> >>_______________________________________________
> >>Aximx50-port mailing list
> >>Aximx50-port_at_handhelds.org
> >>https://www.handhelds.org/mailman/listinfo/aximx50-port
> >>
> >>
> >>
> >
> >
> >
> > --
> > The box said "requires Microsoft Windows xp or higher" so I installed
> Linux.
> >
> > With Linux and Mac OS together they will throw down the evil empire of
> > Microsoft.
> --
> _______________________________________________
> Aximx50-port mailing list
> Aximx50-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>

--
~Jorge