Well... sometimes part1 doesn't works, sometimes part2, sometimes disc...
I finally made 3 lines mounting each device, so between the three
there's one that will mount :D
Ok, i can't see the kernel booting, but it slowly fades from the haret
app into a white screen, with some vertical lines.
At least it seems the SD card is mounted, but Opie is not loading :(
Anything more that i should try?
I was considering putting udev into the initrd, i haven't looked for
info about udev on an arm arch... but it would help us a lot :)
JeDi wrote:
> On 1/5/06, Angel Sánchez Morales <salemixu_at_gmail.com> wrote:
>
>>Yup, i tried Jedi's way, it says "there's no such device or
>> >> address" , well, off to work, this night perhaps i'll be fresh and
>>see what i'm doing wrong, thanks :)
>
>
> These are the steps how I got it working:
> 1. fdisk /dev/hdc
> 2. create one partition (whole disk, linux system)
> 3. mke2fs /dev/hdc1
> 4. edit the linuxrc to mount /dev/mmc/blk0/part1 in stead of /dev/mmc/blk0/disk
> 5. Watch OPIE boot :-)
>
> Maybe your SD card isn't supported? I use a 256MB card from SanDisk.
> I've heard some stories about some brands of SD cards not being
> supported.
>
> Good luck!
> Greetz,
> JeDi
Received on Thu Jan 05 2006 - 18:47:16 EST
This archive was generated by hypermail 2.2.0 : Thu Jan 05 2006 - 18:51:03 EST