Boot+Flash from SD Card Now Working

*X50v SD Boot/Flash Files*

I've got a tested and working X50v PPC2K3 A05 nb0 and crc uploaded to:-

http://tinyurl.com/9hbbj

Follow these steps to install:-

1. Copy the image file (*.nb0) and the corresponding CRC file to one SD card
root directory (the SD card must be formated as FAT32).
2. Insert that SD card into PDA
3. Hold "Power" + "Wireless" + "Reset" simultaneously for one second.
Release "Reset" and hold the other two buttons until system comes up a
screen for SD Update Mode.
4. Use the navigator (Up or Down) to select which image you want to update
if more than one valid image existing on the SD card
5. Wait till reflash completes.

Note: If the card cannot be recognized, or no file is found, please
re-format the SD card and repeat the above steps.

Hope it is of some use.

BTW, this has only been tested on an X50v that already had 2003 installed. I
dont know if the restructured storage would screw anything up if WM5 was
installed prior to flashing. Of course, the downgrade to 2003 is an option
in this case to prep the X50v.

TC
Received on Sat Dec 31 2005 - 15:24:10 EST