I can't get the new kernel to boot :-(
I don't have a serial cable, so I really can't check much. I've put
the k2-6-13-hh0 kernel at
http://lumumba.uhasselt.be/~jedi/x50v-linux/k2-6-13-hh0/ if someone
wants to try it. Nothing is shown on the screen.
On 12/6/05, JeDi <jeroen.dierckx_at_gmail.com> wrote:
> Glad someone else managed to boot this :-) I'm trying to get the
> latest (2.6.13-hh0) kernel to work right now. I'll post later with
> results.
>
> It's normal that my kernel stops at that point. I haven't generated an
> initrd to go with it, so... I'll start with that when I get this
> kernel to boot. It's kinda slow because I don't have a serial cable
> (so until we get usb networking, it's trying, failing, recompiling and
> trying again).
>
> But at least it's progressing!
>
> Greetz,
> JeDi
>
>
> On 12/6/05, Angel Sánchez Morales <salemixu_at_gmail.com> wrote:
> > Wohooo!!!
> > At last!!! I love you guys! :p
> >
> > I put the files on the ROM (Built-in Storage) and now it boots!!! :DDD
> > Tested: it seems not to boot when connected to synce.
> > The pity is that there's no penguin at the start as happened on fisherss
> > video, but hey! it's booting! :D
> > With JeDi's kernel it boots fine till it says Freeing init memory:80K,
> > then it doesn't do anything.
> > With Fisherss kernel after the freeing init memory line it says:
> >
> > pxa27x_udc: version magic '2.6.11-hh0tnb0 ARMv5 gcc-3.4' should be
> > '2.6.11-hh2 preempt ARMv5 gcc-3.4'
> > g_ether: version magic '2.6.11-hh0tnb0 ARMv5 gcc-3.4' should be
> > '2.6.11-hh2 preempt ARMv5 gcc-3.4'
> >
> > And with the kernels generated with the CVS source tree... there's no
> > luck, they don't boot, still ;)
> >
> >
> > Mark Co-Dyre wrote:
> > > Good idea.. although mine was on a CF. But, i was thinking that the sd
> > > might be causing issues
> > >
> > > On 12/6/05, *JeDi* < jeroen.dierckx_at_gmail.com
> > > <mailto:jeroen.dierckx_at_gmail.com>> wrote:
> > >
> > > Also, note that I didn't put my files on an SD or CF card, but on the
> > > Built-in Storage. Maybe that makes a difference? Not that it should,
> > > though...
> > >
> > > On 12/6/05, JeDi <jeroen.dierckx_at_gmail.com
> > > <mailto:jeroen.dierckx_at_gmail.com>> wrote:
> > > > There seem to be some issues. I just tried it again, and in stead of
> > > > the nice kernel output I got before, the screen started to become
> > > very
> > > > bright with a pink strip on the left. I quickly reset it. It seem to
> > > > fail at random times, but most of the time it works on this
> > > particular
> > > > pda. Strange...
> > > >
> > > > On 12/6/05, Mark Co-Dyre <markcodyre_at_gmail.com
> > > <mailto:markcodyre_at_gmail.com>> wrote:
> > > > > Weird thats exactly what I do too. Check to make sure the
> > > image files are
> > > > > the correct size... No data corruption. I've had that happen
> > > before, it
> > > > > through me for a loop. I'll think on it a bit more here and
> > > see if I can
> > > > > come up with anything else.
> > > > >
> > > > >
> > > > > Mark
> > > > >
> > > > >
> > > > > On 12/6/05, Angel Sánchez Morales <salemixu_at_gmail.com
> > > <mailto:salemixu_at_gmail.com>> wrote:
> > > > > > Yup, i have reseted the ram, and after updating the A05 ROM
> > > the ROM too,
> > > > > > it's like when i got it for the first time but with an SD
> > > card where i
> > > > > > have haret, the kernels, some stupid apps and videos.
> > > > > > I'm starting to think that there might be some different
> > > versions of the
> > > > > > x50(v).
> > > > > >
> > > > > > I'll explain what i do to try to boot the kernel, perhaps i'm
> > > doing
> > > > > > something wrong:
> > > > > > - First i boot the pda, like new, having reseted the ram
> > > > > > - then activate mirror mode
> > > > > > - use file explorer to navigate to my 1gb sd card
> > > > > > - it's in the \Linux\ and \Linux\Jedi kernel\ folder of my sd
> > > > > > - i launch haret tapping over the app
> > > > > > - then i click on run
> > > > > > - and... no updates on the screen
> > > > > >
> > > > > > I think it's the normal thing all of us do, isn't it? xD
> > > > > > Perhaps we could compare some data from the back of the pda,
> > > the version
> > > > > > or part number and so on.
> > > > > >
> > > > > > Btw, SE_VGA just rocks when it goes fine :D
> > > > > >
> > > > > >
> > > > > > Mark Co-Dyre wrote:
> > > > > > > Have you tried it with a fresh erase/reboot of the x50v. I
> > > had a few
> > > > > > > isses where I couldn't get the kernel to boot as well and I
> > > found that
> > > > > > > SE_VGA, a program installed on my x50v, was keeping the
> > > kernel from
> > > > > > > showing framebuffer output.
> > > > > > >
> > > > > > > Good luck ... don't give up you'll get it!
> > > > > > >
> > > > > > > Mark
> > > > > > >
> > > > > > > On 12/5/05, *Angel Sánchez Morales* < salemixu_at_gmail.com
> > > <mailto:salemixu_at_gmail.com>
> > > > > > > <mailto:salemixu_at_gmail.com <mailto:salemixu_at_gmail.com>>> wrote:
> > > > > > >
> > > > > > > Tried with my PDA updated to the A05 rom and still the
> > > same :(
> > > > > > > And yes, i've activated mirror mode.
> > > > > > > The only difference is in this line on the haret output:
> > > > > > >
> > > > > > > Preloader physical/virtual address: aaf54000
> > > > > > >
> > > > > > > Before it had a value of aaf3c000
> > > > > > >
> > > > > > > I looke at the back of the pda and noticed it came with
> > > an A04 rom
> > > > > heh.
> > > > > > > After the hung when booting the linux kernel i rebooted
> > > the pda and
> > > > > for
> > > > > > > the first time appeared a screen that said that a
> > > memory error had
> > > > > been
> > > > > > > detected, perhaps it's because the rom update...
> > > > > > >
> > > > > > > Now i don't know what more to do to get the kernel
> > > booting :(
> > > > > > >
> > > > > > >
> > > > > > > JeDi wrote:
> > > > > > > > On 12/5/05, Angel Sánchez Morales <
> > > salemixu_at_gmail.com <mailto:salemixu_at_gmail.com>
> > > > > > > <mailto: salemixu_at_gmail.com <mailto:salemixu_at_gmail.com>
> > > >> wrote:
> > > > > > > >
> > > > > > > >>Well... now i don't feel so stupid xD
> > > > > > > >>Using your kernel still doesn't do anything :(
> > > > > > > >>With Haret i get this:
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>telnet 192.168.131.201 <http://192.168.131.201>
> > > <http://192.168.131.201> 9999
> > > > > > > >>Trying 192.168.131.201 <http://192.168.131.201>.. .
> > > > > > > >>Connected to 192.168.131.201
> > > <http://192.168.131.201> <http://192.168.131.201>.
> > > > > > > >>Escape character is '^]'.
> > > > > > > >>Welcome, this is HaRET running on WindowsCE v4.21
> > > > > > > >>Minimal virtual address: 00010000, maximal virtual
> > > address:
> > > > > 7fffffff
> > > > > > > >>CPU is Intel ARM arch 5TE revision 0 product 17
> > > stepping 4
> > > > > running in
> > > > > > > >>system mode
> > > > > > > >>Enter 'HELP' for a short command summary.
> > > > > > > >>
> > > > > > > >>HaRET(1)# Physical kernel address: a8008000
> > > > > > > >>Preloader physical/virtual address: aaf3c000
> > > > > > > >>Physical initrd address: a8408000
> > > > > > > >>Goodbye cruel world ...
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>And that's it, nothing more, nothing on the LCD.
> > > > > > > >>I tried also putting the processor saving mode to
> > > full speed and
> > > > > > > nothing.
> > > > > > > >>Now i'm truely lost on what i should do to boot the
> > > kernel on my
> > > > > > > PDA.
> > > > > > > >>Is my PDA different from yours? :/
> > > > > > > >>I have a x50v that came with the english A02 rom
> > > (bought on eBay
> > > > > to a
> > > > > > > >>USA guy).
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Well, I have an x50v, updated to A05 rom, but I
> > > don't think that
> > > > > > > would
> > > > > > > > be the problem, unless there was some bug in the
> > > mirrorring mode
> > > > > > > > functionality in the older roms. You did enable
> > > mirror mode,
> > > > > right?
> > > > > > > > Cause, as Alex said, it tells the pda to put the pxa
> > > lcd
> > > > > > > controller in
> > > > > > > > charge of the framebuffer output (in stead of the
> > > > > > > hardware-accelerated
> > > > > > > > intel chip).
> > > > > > > >
> > > > > > > > Hopefully more news this nigt...
> > > > > > > >
> > > > > > > > Greetz,
> > > > > > > > JeDi
> > > > > > > --
> > > > > > > _______________________________________________
> > > > > > > Aximx50-port mailing list
> > > > > > > Aximx50-port_at_handhelds.org
> > > <mailto:Aximx50-port_at_handhelds.org>
> > > <mailto:Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>>
> > > > > > >
> > > > > https://www.handhelds.org/mailman/listinfo/aximx50-port
> > > <https://www.handhelds.org/mailman/listinfo/aximx50-port>
> > > > > > >
> > > > > <https://www.handhelds.org/mailman/listinfo/aximx50-port >
> > > > > > >
> > > > > > >
> > > > > > --
> > > > > > _______________________________________________
> > > > > > Aximx50-port mailing list
> > > > > > Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>
> > > > > > https://www.handhelds.org/mailman/listinfo/aximx50-port
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > _______________________________________________
> > > > > Aximx50-port mailing list
> > > > > Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>
> > > > > https://www.handhelds.org/mailman/listinfo/aximx50-port
> > > <https://www.handhelds.org/mailman/listinfo/aximx50-port>
> > > > >
> > > > >
> > > > >
> > > >
> > > --
> > > _______________________________________________
> > > Aximx50-port mailing list
> > > Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>
> > > https://www.handhelds.org/mailman/listinfo/aximx50-port
> > >
> > >
> > --
> > _______________________________________________
> > Aximx50-port mailing list
> > Aximx50-port_at_handhelds.org
> > https://www.handhelds.org/mailman/listinfo/aximx50-port
> >
>
Received on Tue Dec 06 2005 - 12:32:18 EST
This archive was generated by hypermail 2.2.0 : Tue Dec 06 2005 - 12:33:42 EST