Re: Question about display.

I think I may have figured it out after a bit of trial and error and reading
Documentation/fb/framebuffer.txt. I've managed to get it right so it
seems. I ended up just having to change the left and right margins left is
now 22 and right is 38. I also increased the top by a line to make it 5, it
seemed clip just a bit. Attached is the diff file if someone can verify
this and let me know any reason why this could be wrong. Also, if it is
right, is it possible to get it posted in cvs.

Thanks,
Joe

On Fri, Apr 25, 2008 at 9:18 AM, Joe Belford <joebelford_at_gmail.com> wrote:

> So after a few months, I'm back to trying to get this framebuffer issue
> straightened out on the x50. I've found that I can modify the left and
> right margins in arch/arm/mach-pxa/aximx50/aximx50.c to get the framebuffer
> to move closer to the left of the display but after a certain point I end up
> with a single horizontal line. Currently the closest I can get is a left
> margin of 39 and a right margin of 16. Is there somewhere else I should be
> looking? Would changing the hsync_len help me out? Any suggestions on
> where to start would be greatly appreciated. Currently I'm working with
> kernel sources 2.6.21-hh20 from handhelds.org cvs.
>
> Thanks,
> Joe
>
> On Sat, Jun 2, 2007 at 9:22 AM, Joe Belford <joebelford_at_gmail.com> wrote:
>
> > Hi all, I'm a bit new at this handheld thing and I'm running into a
> > problem. I'm running an Axim X50 with the kernel and Angstrom image dated
> > 20070316. My problem is the gpe display seems to be shifted about 1/2 inch
> > to the right. This makes the calibration x's on the right not visible so
> > calibration is an issue as well as just displaying the GUI. Could someone
> > please point me in the right direction to fixing this problem.
> >
> > Thanks,
> > Joe
> >
>
>
Received on Fri Apr 25 2008 - 12:28:10 EDT