Re: X51V: Can't calibrate on first boot

2007/6/23, Robert Martin <robertltux_at_gmail.com>:
> On 6/22/07, 0xd34df00d <0xd34df00d_at_gmail.com> wrote:
> > For me the sequence is upper left->upper right->lower right->lower
> > left->center. And I think that touching the screen several times to
> > get the crosshair moving is not OK, am I right?
> >
> > And what do you mean by firmware reload? I'm using Haret.
> >
> > 2007/6/23, Robert Martin <robertltux_at_gmail.com>:
> > > On 6/22/07, 0xd34df00d <0xd34df00d_at_gmail.com> wrote:
> > > > Hi all!
> > > >
> > > > I've followed the manual exactly, but when I try to calibrate my
> > > > screen (as prompted on first boot), I can't do it, because calibration
> > > > becames an infinite loop (after I press the crosshair in the center of
> > > > the screen, it moves back to it start position - top-left), so I can't
> > > > go further. And by the way, to get crosshair moving to any next
> > > > position, I should press (anywhere on the screen) five or six times.
> > > >
> > > > Thanks a lot and sorry for my English.
> > > >
> > > > --
> > > > --
> > > > _______________________________________________
> > > > Aximx50-port mailing list
> > > > Aximx50-port_at_handhelds.org
> > > > https://www.handhelds.org/mailman/listinfo/aximx50-port
> > > >
> > > what it should do is center upper left upper right lower left lower
> > > right > next the trick is you need to peg the crosshair in the center
> > > each time (there may be some sort of checksum to prevent a bad
> > > calibrate)
> > > if that doesn't work i would suggest doing a firmware reload
> > > --
> > > Robert L Martin
> > > --
> >
> a suggestion check to see if the axim works under the default os
> (leave the card out and then try it) also please put your responses
> below the previous postings
>
> --
> Robert L Martin
> --
> _______________________________________________
> Aximx50-port mailing list
> Aximx50-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>

Axim works under the default os (win 5.0) just fine, everything is OK,
touchscreen handles clicks as they should be handled.

--