Re: X51V: Can't calibrate on first boot

On 6/22/07, 0xd34df00d <0xd34df00d_at_gmail.com> wrote:
> Hi all!
>
> I've followed the manual exactly, but when I try to calibrate my
> screen (as prompted on first boot), I can't do it, because calibration
> becames an infinite loop (after I press the crosshair in the center of
> the screen, it moves back to it start position - top-left), so I can't
> go further. And by the way, to get crosshair moving to any next
> position, I should press (anywhere on the screen) five or six times.
>
> Thanks a lot and sorry for my English.
>
> --
> --
> _______________________________________________
> Aximx50-port mailing list
> Aximx50-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>
what it should do is center upper left upper right lower left lower
right > next the trick is you need to peg the crosshair in the center
each time (there may be some sort of checksum to prevent a bad
calibrate)
if that doesn't work i would suggest doing a firmware reload

-- 
Robert L Martin