Re: Aximx50(v) Angstrom/Gpe build

Nick Jaksic schrieb:
> I have seen this too few months back while i was using AXIM x50v.
> (today I am using x51v) make sure that you don't have any unnecessary
> file in the root of your partitions (fat or ext2). also make sure all
> wince apps are killed and that mirror mode is on. i was getting 2:1
> success on boot following this rule. i would get one out of every 2-3
> tries.
>
> hope this helps,
>
> nick
>
>
> Alvaro Aguirre wrote:
>> I have EXACTLY the same problem. x50v (spanish fw), with mirror hangs
>> after the progress bar finish and without it the green line appears.
>> I'm using a sandisk 1 GB sd card.
>>
>> Cheers,
>> Alvaro
>>
>> On 3/19/07, *Andreas Skowron* <andreas-skowron_at_dskw.de
>> <mailto:andreas-skowron_at_dskw.de>> wrote:
>>
>> Patrick Steiner schrieb:
>> > hi,
>> >
>> > i took some time but now i have uploaded 2 new images onto my
>> webspace.
>> > the aximx50 one is for the non vga devices. but read the README
>> > ( http://law.hostsen.net/oe/axim/README) and you know more ;-)
>> >
>> > here are the images:
>> >
>> > aximx50:
>> > http://law.hostsen.net/oe/axim/aximx50/
>> <http://law.hostsen.net/oe/axim/aximx50/>
>> >
>> > aximx50v:
>> > http://law.hostsen.net/oe/axim/aximx50v/
>> >
>> > the aximx50 image is untested because i don't have such a device.
>> >
>> > so please report me if this one works.
>> >
>> > happy testing
>> >
>> > regards,
>> > patrick
>> >
>> Hi Patrick.
>>
>>
>> I tried your x50v build but i can't get it booting...
>>
>> With mirror-mode enabled the system just hangs after haret filled the
>> progress bar.
>> Without mirror-mode it's the same, but with a ~ 2px thick green line
>> somewhere on the screen.
>>
>> I followed your readme instructions.
>>
>>
>> yours,
>> Andreas
>> --
>> _______________________________________________
>> Aximx50-port mailing list
>> Aximx50-port_at_handhelds.org <mailto:Aximx50-port_at_handhelds.org>
>> https://www.handhelds.org/mailman/listinfo/aximx50-port
>>
>>
OK, now i've tried it 10-15 times in a row with mirror-mode on but it
still wont boot

the last time i got a running image was a long time ago when the first
touchscreen driver has been implented

Any hints what i could try?
Received on Tue Mar 20 2007 - 07:09:31 EST