Klavs Sørensen a écrit :
> Hi Pierre,
>
> Thanks for the fast reply. When I boot the kernel (both hh1 and hh2),
> haret hangs after go go go and a green line in the top of the display is
> all I'm getting, the Axim is dead after this. Only reset restores it.
> Any tips ?
It means HaRET failed when disabling hardware. I am surprized because it
is quite stable on x51v. A few basic things to check :
- are you sure to use HaRET 0.4.7 ?
- did you try to boot linux just after axim reset ?
- what default.txt are you using ?
- is mirror mode enabled on your x51v ?
- did you try to "hard reset" your axim (beware : your will loose all
the installed sotwares and I am not sure about your data) ? I had to do
it once.
Pierre
>
> Regards,
>
> Klavs
>
>
> Pierre GAUFILLET wrote:
>> First, regarding internals pictures :
>> http://www.handhelds.org/moin/moin.cgi/X50Pictures has been updated.
>>
>> Klavs M. Sørensen a écrit :
>>
>>> Hi All,
>>>
>>> Been following your list for quite some time, but have lost the thread
>>> ;-). I own a x51v and, of course, wants it to boot linux. What do I do ?
>>> Where can I fetch some images to use ?
>>>
>>
>> Have a look at
>> http://www.handhelds.org/hypermail/aximx50-port/current/1200.html,
>> especially the README.
>>
>> Good luck ;-)
>>
>> Pierre
>>
>>
>
Received on Sun Mar 18 2007 - 14:02:55 EST
This archive was generated by hypermail 2.2.0 : Sun Mar 18 2007 - 14:03:09 EST