Re: Aximx50-port Digest, Vol 20, Issue 45

From: <postmaster_at_UMontreal.CA> Date: Sun, 25 Feb 2007 15:18:36 -0500 (EST) · > On Thursday, 22. February 2007 18:39:25 Pierre GAUFILLET wrote:

-- 
Patrick Steiner | patrick.steiner_at_a1.net
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
 
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 4
Date: Sun, 25 Feb 2007 16:36:29 +0100
From: Patrick Steiner <patrick.steiner_at_a1.net>
Subject: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <200702251636.29772.patrick.steiner_at_a1.net>
Content-Type: text/plain;  charset="us-ascii"
hi,
i currently try to get the touchscreen working with my angstrom image.
could someone describe my how i can set this up?
modprobe aximx50_ts  works, but lsmod says it is used my 0
anything else todo?
 patrick
-- 
Patrick Steiner | patrick.steiner_at_a1.net
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
 
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 5
Date: Sun, 25 Feb 2007 16:48:26 +0100
From: Pierre GAUFILLET <pierre.gaufillet_at_magic.fr>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <45E1AFCA.5070206_at_magic.fr>
Content-Type: text/plain; charset=UTF-8
Patrick Steiner a Ã©crit :
> hi,
> 
> i currently try to get the touchscreen working with my angstrom image.
> 
> could someone describe my how i can set this up?
> 
> modprobe aximx50_ts  works, but lsmod says it is used my 0
> 
> anything else todo?
No, I think it is ok.
On the other hand, I did not verify the behavior of aximx50_ts with
.freq = 100000
It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
but I think that's all.
Now, a simple way to verify it is working is to verify the debug output
of the kernel, or to enable printk line 167 in
drivers/input/touchscreen/ts-adc-debounce.c :
	} else {
		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
Pierre
> 
>  patrick
------------------------------
Message: 6
Date: Sun, 25 Feb 2007 17:12:32 +0100
From: Patrick Steiner <patrick.steiner_at_a1.net>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <200702251712.32291.patrick.steiner_at_a1.net>
Content-Type: text/plain;  charset="utf-8"
On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> Patrick Steiner a Ã©crit :
> > hi,
> >
> > i currently try to get the touchscreen working with my angstrom image.
> >
> > could someone describe my how i can set this up?
> >
> > modprobe aximx50_ts  works, but lsmod says it is used my 0
> >
> > anything else todo?
>
> No, I think it is ok.
>
> On the other hand, I did not verify the behavior of aximx50_ts with
> .freq = 100000
>
> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> but I think that's all.
>
> Now, a simple way to verify it is working is to verify the debug output
> of the kernel, or to enable printk line 167 in
> drivers/input/touchscreen/ts-adc-debounce.c :
>
> 	} else {
> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>
>
>
> Pierre
>
> >  patrick
Ok i saw that you build a new patch. i haved applied this. but it doesnt apply 
do the latest hh-kernel HEAD version, perhaps you could build a new patch...
after that i can try it again.
regards,
 patrick
-- 
Patrick Steiner | patrick.steiner_at_a1.net
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
 
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 7
Date: Sun, 25 Feb 2007 17:14:20 +0100
From: Pierre GAUFILLET <pierre.gaufillet_at_magic.fr>
Subject: Re: [Aximx50-port] OE/Angstrom build
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <45E1B5DC.8020505_at_magic.fr>
Content-Type: text/plain; charset=UTF-8
Great ! It is booting now from a SD card, to the touchscreen calibration.
Thanks for your help, Patrick :-)
I have to enable a ttyS0 terminal, and I'll have a look to aximx50_ts.
Pierre
Patrick Steiner a Ã©crit :
> hi,
> 
> i have booted the angstrom bootstrap images in 2 different ways now.
> 
> 1: initramfs
> 
> build a cpio.gz image (IMAGE_FSTYPES = "cpio.gz" in you local.conf)
> but the zImage + angstrom.cpio.gz + haret.exe + default.txt onto you sd card 
> (vfat formated). and boot it. default.txt should look like this:
> 
> set GAFR(34) 1 
> set GAFR(35) 1 
> set GAFR(37) 1 
> set GAFR(39) 2 
> set GAFR(40) 2 
> set GAFR(41) 2 
> set GPDR(34) 0 
> set GPDR(35) 0 
> set GPDR(37) 0 
> set GPLR(34) 1 
> set GPLR(35) 1 
> set GPLR(37) 1 
> set GPLR(39) 1
> 
> set com "1"
> set kernel "zImage-2.6.20-hh1+cvs20070224-aximx50-20070224164343"
> set initrd "Angstrom-bootstrap-image-test-20070224-aximx50.rootfs.cpio.gz"
> set mtype "740"
> set cmdline "root=/dev/ram0 rw 
> ip=10.0.0.2:10.0.0.1:10.0.0.1:255.255.255.0:axim:usb0:none 
> console=ttyS0,115200n8 console=tty0 ramdisk_size=32768 rdinit=/sbin/init 
> psplash=false"
> boot
> 
> 
> 2: rootfs-on-sd
> 
> this method also works with a gpe image, the other method doesn't boot gpe for 
> me.
> 
> more infos are available here:
> http://userpage.fu-berlin.de/~zabel/magician/README
> 
> and the default.txt  is available here:
> http://userpage.fu-berlin.de/~zabel/magician/default.txt
> 
> replace boot2 with boot
> 
> 
> 
> the angstrom gpe images boots only via the ext2-on-sd method for me.
> 
> iÂ´ll try to build a nice working gpe image (incl. touchscreen support) and 
> post it on my webspace...
> 
------------------------------
Message: 8
Date: Sun, 25 Feb 2007 17:21:54 +0100
From: Pierre GAUFILLET <pierre.gaufillet_at_magic.fr>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <45E1B7A2.7090309_at_magic.fr>
Content-Type: text/plain; charset=UTF-8
Patrick Steiner a Ã©crit :
> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
>> Patrick Steiner a Ã©crit :
>>> hi,
>>>
>>> i currently try to get the touchscreen working with my angstrom image.
>>>
>>> could someone describe my how i can set this up?
>>>
>>> modprobe aximx50_ts  works, but lsmod says it is used my 0
>>>
>>> anything else todo?
>> No, I think it is ok.
>>
>> On the other hand, I did not verify the behavior of aximx50_ts with
>> .freq = 100000
>>
>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
>> but I think that's all.
>>
>> Now, a simple way to verify it is working is to verify the debug output
>> of the kernel, or to enable printk line 167 in
>> drivers/input/touchscreen/ts-adc-debounce.c :
>>
>> 	} else {
>> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
>> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>>
>>
>>
>> Pierre
>>
>>>  patrick
> 
> Ok i saw that you build a new patch. i haved applied this. but it doesnt apply 
> do the latest hh-kernel HEAD version, perhaps you could build a new patch...
I did not build any new patch since 2.6.20-hh1. This kernel is up to
date regarding aximx50 touchscreen driver (but it does not mean that it
is working either...).
> 
> after that i can try it again.
> 
> regards,
>  patrick
> 
------------------------------
Message: 9
Date: Sun, 25 Feb 2007 17:26:32 +0100
From: Patrick Steiner <patrick.steiner_at_a1.net>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <200702251726.32790.patrick.steiner_at_a1.net>
Content-Type: text/plain;  charset="utf-8"
On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
> Patrick Steiner a Ã©crit :
> > On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> >> Patrick Steiner a Ã©crit :
> >>> hi,
> >>>
> >>> i currently try to get the touchscreen working with my angstrom image.
> >>>
> >>> could someone describe my how i can set this up?
> >>>
> >>> modprobe aximx50_ts  works, but lsmod says it is used my 0
> >>>
> >>> anything else todo?
> >>
> >> No, I think it is ok.
> >>
> >> On the other hand, I did not verify the behavior of aximx50_ts with
> >> .freq = 100000
> >>
> >> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> >> but I think that's all.
> >>
> >> Now, a simple way to verify it is working is to verify the debug output
> >> of the kernel, or to enable printk line 167 in
> >> drivers/input/touchscreen/ts-adc-debounce.c :
> >>
> >> 	} else {
> >> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> >> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
> >>
> >>
> >>
> >> Pierre
> >>
> >>>  patrick
> >
> > Ok i saw that you build a new patch. i haved applied this. but it doesnt
> > apply do the latest hh-kernel HEAD version, perhaps you could build a new
> > patch...
>
> I did not build any new patch since 2.6.20-hh1. This kernel is up to
> date regarding aximx50 touchscreen driver (but it does not mean that it
> is working either...).
ok could you please tell me if your ts works. 
>
> > after that i can try it again.
> >
> > regards,
> >  patrick
-- 
Patrick Steiner | patrick.steiner_at_a1.net
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
 
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
Message: 10
Date: Sun, 25 Feb 2007 17:34:41 +0100
From: Pierre GAUFILLET <pierre.gaufillet_at_magic.fr>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <45E1BAA1.1060104_at_magic.fr>
Content-Type: text/plain; charset=UTF-8
Patrick Steiner a Ã©crit :
> On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
>> Patrick Steiner a Ã©crit :
>>> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
>>>> Patrick Steiner a Ã©crit :
>>>>> hi,
>>>>>
>>>>> i currently try to get the touchscreen working with my angstrom image.
>>>>>
>>>>> could someone describe my how i can set this up?
>>>>>
>>>>> modprobe aximx50_ts  works, but lsmod says it is used my 0
>>>>>
>>>>> anything else todo?
>>>> No, I think it is ok.
>>>>
>>>> On the other hand, I did not verify the behavior of aximx50_ts with
>>>> .freq = 100000
>>>>
>>>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
>>>> but I think that's all.
>>>>
>>>> Now, a simple way to verify it is working is to verify the debug output
>>>> of the kernel, or to enable printk line 167 in
>>>> drivers/input/touchscreen/ts-adc-debounce.c :
>>>>
>>>> 	} else {
>>>> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
>>>> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>>>>
>>>>
>>>>
>>>> Pierre
>>>>
>>>>>  patrick
>>> Ok i saw that you build a new patch. i haved applied this. but it doesnt
>>> apply do the latest hh-kernel HEAD version, perhaps you could build a new
>>> patch...
>> I did not build any new patch since 2.6.20-hh1. This kernel is up to
>> date regarding aximx50 touchscreen driver (but it does not mean that it
>> is working either...).
> 
> ok could you please tell me if your ts works. 
of course, I'll keep you informed ;-)
BTW, can you tell me where embedded modules are defined ?
Only a subset is available in rootfs.
Finally, the 2.6.20 MMC/SD driver is broken with all my SD cards... :-(
>>> after that i can try it again.
>>>
>>> regards,
>>>  patrick
> 
> 
> 
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 24
********************************************
------------------------------
Message: 2
Date: Sun, 25 Feb 2007 17:39:46 +0100
From: Patrick Steiner <patrick.steiner_at_a1.net>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <200702251739.46474.patrick.steiner_at_a1.net>
Content-Type: text/plain;  charset="utf-8"
On Sunday, 25. February 2007 17:34:41 Pierre GAUFILLET wrote:
> Patrick Steiner a Ã©crit :
> > On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
> >> Patrick Steiner a Ã©crit :
> >>> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> >>>> Patrick Steiner a Ã©crit :
> >>>>> hi,
> >>>>>
> >>>>> i currently try to get the touchscreen working with my angstrom
> >>>>> image.
> >>>>>
> >>>>> could someone describe my how i can set this up?
> >>>>>
> >>>>> modprobe aximx50_ts  works, but lsmod says it is used my 0
> >>>>>
> >>>>> anything else todo?
> >>>>
> >>>> No, I think it is ok.
> >>>>
> >>>> On the other hand, I did not verify the behavior of aximx50_ts with
> >>>> .freq = 100000
> >>>>
> >>>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> >>>> but I think that's all.
> >>>>
> >>>> Now, a simple way to verify it is working is to verify the debug
> >>>> output of the kernel, or to enable printk line 167 in
> >>>> drivers/input/touchscreen/ts-adc-debounce.c :
> >>>>
> >>>> 	} else {
> >>>> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> >>>> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
> >>>>
> >>>>
> >>>>
> >>>> Pierre
> >>>>
> >>>>>  patrick
> >>>
> >>> Ok i saw that you build a new patch. i haved applied this. but it
> >>> doesnt apply do the latest hh-kernel HEAD version, perhaps you could
> >>> build a new patch...
> >>
> >> I did not build any new patch since 2.6.20-hh1. This kernel is up to
> >> date regarding aximx50 touchscreen driver (but it does not mean that it
> >> is working either...).
> >
> > ok could you please tell me if your ts works.
>
> of course, I'll keep you informed ;-)
>
> BTW, can you tell me where embedded modules are defined ?
> Only a subset is available in rootfs.
>
> Finally, the 2.6.20 MMC/SD driver is broken with all my SD cards... :-(
hmm strange my kingston 128mb card works fine.
you can autoload modules via you machine config file (aximx50.conf) the ipkg 
files are located at: tmp/deploy/glibc/ipk/aximx50
btw. if you reboot your axim via linux you get a secret menu after automatic 
restart ;-)
>
> >>> after that i can try it again.
> >>>
> >>> regards,
> >>>  patrick
-- 
Patrick Steiner | patrick.steiner_at_a1.net
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
 
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 25
********************************************
------------------------------
Message: 2
Date: Sun, 25 Feb 2007 19:24:10 +0100
From: Pierre GAUFILLET <pierre.gaufillet_at_magic.fr>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <45E1D44A.8030908_at_magic.fr>
Content-Type: text/plain; charset=UTF-8
Ok, I got the touchscreen to work (with only the ".freq=1850000,"
modification) :
here are the modules required (loaded by hand for now) :
Module                  Size  Used by
ads7846_adc_ssp         3912  0
ts_adc_debounce         4000  0
aximx50_ts              2400  0
ts_calibrate gives then some not-so-bad results.
However, it is still unsufficient to be used "as is".
To be continued...
Pierre
Patrick Steiner a Ã©crit :
> On Sunday, 25. February 2007 17:34:41 Pierre GAUFILLET wrote:
>> Patrick Steiner a Ã©crit :
>>> On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
>>>> Patrick Steiner a Ã©crit :
>>>>> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
>>>>>> Patrick Steiner a Ã©crit :
>>>>>>> hi,
>>>>>>>
>>>>>>> i currently try to get the touchscreen working with my angstrom
>>>>>>> image.
>>>>>>>
>>>>>>> could someone describe my how i can set this up?
>>>>>>>
>>>>>>> modprobe aximx50_ts  works, but lsmod says it is used my 0
>>>>>>>
>>>>>>> anything else todo?
>>>>>> No, I think it is ok.
>>>>>>
>>>>>> On the other hand, I did not verify the behavior of aximx50_ts with
>>>>>> .freq = 100000
>>>>>>
>>>>>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
>>>>>> but I think that's all.
>>>>>>
>>>>>> Now, a simple way to verify it is working is to verify the debug
>>>>>> output of the kernel, or to enable printk line 167 in
>>>>>> drivers/input/touchscreen/ts-adc-debounce.c :
>>>>>>
>>>>>> 	} else {
>>>>>> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
>>>>>> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
>>>>>>
>>>>>>
>>>>>>
>>>>>> Pierre
>>>>>>
>>>>>>>  patrick
>>>>> Ok i saw that you build a new patch. i haved applied this. but it
>>>>> doesnt apply do the latest hh-kernel HEAD version, perhaps you could
>>>>> build a new patch...
>>>> I did not build any new patch since 2.6.20-hh1. This kernel is up to
>>>> date regarding aximx50 touchscreen driver (but it does not mean that it
>>>> is working either...).
>>> ok could you please tell me if your ts works.
>> of course, I'll keep you informed ;-)
>>
>> BTW, can you tell me where embedded modules are defined ?
>> Only a subset is available in rootfs.
>>
>> Finally, the 2.6.20 MMC/SD driver is broken with all my SD cards... :-(
> 
> hmm strange my kingston 128mb card works fine.
> 
> you can autoload modules via you machine config file (aximx50.conf) the ipkg 
> files are located at: tmp/deploy/glibc/ipk/aximx50
> 
> btw. if you reboot your axim via linux you get a secret menu after automatic 
> restart ;-)
> 
> 
> 
>>>>> after that i can try it again.
>>>>>
>>>>> regards,
>>>>>  patrick
> 
> 
> 
------------------------------
Message: 3
Date: Sun, 25 Feb 2007 21:05:19 +0100
From: Patrick Steiner <patrick.steiner_at_a1.net>
Subject: Re: [Aximx50-port] aximx50 touchscreen
To: The porting effort for the Dell Axim x50
	<aximx50-port_at_handhelds.org>
Message-ID: <200702252105.19744.patrick.steiner_at_a1.net>
Content-Type: text/plain;  charset="utf-8"
On Sunday, 25. February 2007 19:24:10 Pierre GAUFILLET wrote:
> Ok, I got the touchscreen to work (with only the ".freq=1850000,"
> modification) :
>
> here are the modules required (loaded by hand for now) :
>
> Module                  Size  Used by
> ads7846_adc_ssp         3912  0
> ts_adc_debounce         4000  0
> aximx50_ts              2400  0
>
> ts_calibrate gives then some not-so-bad results.
> However, it is still unsufficient to be used "as is".
>
> To be continued...
>
> Pierre
i have also build a new image now but ts_calibrate doesnt work for me :-(
 ts_calibrate
xres = 480, yres = 640
selected device is not a touchscreen I understand
Took 1 samples...
Top left : X =    0 Y =    0
Took 1 samples...
Top right : X =    0 Y =    0
Took 1 samples...
Bot right : X =    0 Y =    0
Took 1 samples...
Bot left : X =    0 Y =    0
Took 1 samples...
Center : X =    0 Y =    0
ts_calibrate: determinant is too small -- 0.000000
Calibration failed.
any ideas whats wrong?
but ts_test outputs something if i push the screen.
 patrick
>
> Patrick Steiner a Ã©crit :
> > On Sunday, 25. February 2007 17:34:41 Pierre GAUFILLET wrote:
> >> Patrick Steiner a Ã©crit :
> >>> On Sunday, 25. February 2007 17:21:54 Pierre GAUFILLET wrote:
> >>>> Patrick Steiner a Ã©crit :
> >>>>> On Sunday, 25. February 2007 16:48:26 Pierre GAUFILLET wrote:
> >>>>>> Patrick Steiner a Ã©crit :
> >>>>>>> hi,
> >>>>>>>
> >>>>>>> i currently try to get the touchscreen working with my angstrom
> >>>>>>> image.
> >>>>>>>
> >>>>>>> could someone describe my how i can set this up?
> >>>>>>>
> >>>>>>> modprobe aximx50_ts  works, but lsmod says it is used my 0
> >>>>>>>
> >>>>>>> anything else todo?
> >>>>>>
> >>>>>> No, I think it is ok.
> >>>>>>
> >>>>>> On the other hand, I did not verify the behavior of aximx50_ts with
> >>>>>> .freq = 100000
> >>>>>>
> >>>>>> It may be required to replace it by .freq = 1850000 in aximx50_ts.c,
> >>>>>> but I think that's all.
> >>>>>>
> >>>>>> Now, a simple way to verify it is working is to verify the debug
> >>>>>> output of the kernel, or to enable printk line 167 in
> >>>>>> drivers/input/touchscreen/ts-adc-debounce.c :
> >>>>>>
> >>>>>> 	} else {
> >>>>>> 		printk("%04d %04d\n", (int)ts_pos.xd, (int)ts_pos.yd);
> >>>>>> 		report_touchpanel(ts, ts_pos.xd, ts_pos.yd, 1);
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Pierre
> >>>>>>
> >>>>>>>  patrick
> >>>>>
> >>>>> Ok i saw that you build a new patch. i haved applied this. but it
> >>>>> doesnt apply do the latest hh-kernel HEAD version, perhaps you could
> >>>>> build a new patch...
> >>>>
> >>>> I did not build any new patch since 2.6.20-hh1. This kernel is up to
> >>>> date regarding aximx50 touchscreen driver (but it does not mean that
> >>>> it is working either...).
> >>>
> >>> ok could you please tell me if your ts works.
> >>
> >> of course, I'll keep you informed ;-)
> >>
> >> BTW, can you tell me where embedded modules are defined ?
> >> Only a subset is available in rootfs.
> >>
> >> Finally, the 2.6.20 MMC/SD driver is broken with all my SD cards... :-(
> >
> > hmm strange my kingston 128mb card works fine.
> >
> > you can autoload modules via you machine config file (aximx50.conf) the
> > ipkg files are located at: tmp/deploy/glibc/ipk/aximx50
> >
> > btw. if you reboot your axim via linux you get a secret menu after
> > automatic restart ;-)
> >
> >>>>> after that i can try it again.
> >>>>>
> >>>>> regards,
> >>>>>  patrick
-- 
Patrick Steiner | patrick.steiner_at_a1.net
ICQ: 128261350
WWW: http://helmsdeep.homelinux.net/~pat
 
working on (tux4u.skynet):
Fedora Core release 6 (Zod)
GNU/Linux 2.6.19-1.2895.fc6
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 26
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 27
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 28
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 29
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 30
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 31
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 32
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 33
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 34
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 35
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 36
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 37
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 38
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 39
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 40
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 41
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 42
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 43
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 44
********************************************
------------------------------
-- 
_______________________________________________
Aximx50-port mailing list
Aximx50-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/aximx50-port
End of Aximx50-port Digest, Vol 20, Issue 45
********************************************