RE: Changes in hardware ?

> where did you get the haret and zImage? they run in my 416 machine, and
> also should work on yours. I don't think DELL has changed the hardware,
> they must lose much money if the do that .
 
Fisherss : I took those from your page, http://www.fisherss.com/files/alpha/haret.exe etc.

With your zImage and initrd the Haret 0.3.2 output looks like :
Welcome, this is HaRET running on WindowsCE v4.21
Minimal virtual address: 00010000, maximal virtual address: 7fffffff
CPU is Intel ARM arch 5TE revision 0 product 17 stepping 4 running in system mode
Enter 'HELP' for a short command summary.

HaRET(1)# set GAFR(34) 1
HaRET(2)# set GAFR(35) 1
HaRET(3)# set GAFR(37) 1
HaRET(4)# set GAFR(39) 2
HaRET(5)# set GAFR(40) 2
HaRET(6)# set GAFR(41) 2
HaRET(7)# set GPDR(34) 0
HaRET(8)# set GPDR(35) 0
HaRET(9)# set GPDR(37) 0
HaRET(10)# set GPLR(34) 1
HaRET(11)# set GPLR(35) 1
HaRET(12)# set GPLR(37) 1
HaRET(13)# set GPLR(39) 1
HaRET(14)#
HaRET(15)#
HaRET(16)# set kernel "zImage"
HaRET(17)# set initrd "initrd"
HaRET(18)# set mtype "655"
HaRET(19)# set cmdline "root=/dev/ram0 rw ramdisk_size=12288 keepinitrd init=/linuxrc console=tty0 console=ttyS0,115200n8 "
HaRET(20)# boot
Physical kernel address: a8008000
Preloader physical/virtual address: ab1bf000
Physical initrd address: a8408000
Goodbye cruel world ...

Last night I attempted haret version 0.3.6, which looks like it's actually booting the kernel:

Welcome, this is HaRET running on WindowsCE v4.21
Minimal virtual address: 00010000, maximal virtual address: 7fffffff
CPU is Intel ARM arch 5TE revision 0 product 17 stepping 4 running in system mode
Enter 'HELP' for a short command summary.

HaRET(1)# set GAFR(34) 1
HaRET(2)# set GAFR(35) 1
HaRET(3)# set GAFR(37) 1
HaRET(4)# set GAFR(39) 2
HaRET(5)# set GAFR(40) 2
HaRET(6)# set GAFR(41) 2
HaRET(7)# set GPDR(34) 0
HaRET(8)# set GPDR(35) 0
HaRET(9)# set GPDR(37) 0
HaRET(10)# set GPLR(34) 1
HaRET(11)# set GPLR(35) 1
HaRET(12)# set GPLR(37) 1
HaRET(13)# set GPLR(39) 1
HaRET(14)# set kernel "zImage"
HaRET(15)# set initrd "initrd"
HaRET(16)# set mtype "655"
HaRET(17)# set cmdline "root=/dev/ram0 rw ramdisk_size=12288 keepinitrd init=/linuxrc console=tty0 console=ttyS0,115200n8 "
HaRET(18)# boot
Physical kernel address: a0008000
Preloader physical/virtual address: aad6b000
Physical initrd address: a0408000
Goodbye cruel world ...
Detecting if it's a pxa CPU. 69054114
Detecting if it's a pxa CPU. 00000002
skipping the draw thing
Setting Thread Priority
Disabling Multitasking
Setting memory access permissions
Changing to kernel mode
Getting mmu
Calling SetupLoad()
Calling cli...
Shutting Down peripherals
flushing cache
doing something funky wtih mmu and preloaderPA
Starting the kernel.
Machine type: 0000028f
NumPages: 0000016d
Memory Physical Address: a0000000
Preloader PA: aad6b000
TagKernelNumPages: 000000fb

Still, the serial output is keeping up the silent attitude.
Received on Fri Sep 16 2005 - 03:15:53 EDT