Serial cable working

I just tested my serial cable I made by trying booting linux on my
axim50v and it's sort of working.

Now I need to install the development environment and get hold of the
linux kernel. Where are the patches for the axim50v located

this is my output
-------------
Uncompressing Linux..................................................................... done, booting the kernel.

69054114:0000028F:00003A7A
A811AB74-A8325974>A8008000
A8325974
A8008000: E321F0D3 EB000052 E1B0A005 03A00070 0A00004D EB000066 E1B08005 03A00061
A8008020: 0A000049 EB00002B E59FD004 E28FE068 E28AF00C C0008058 C01D6000 C01D6000
A8008040: C0212DC0 C022D6E4 C0216FE0 C0216FD4 C01D8FC8 C01D8000 E24F3028 E8B300F0
A8008060: E1540005 11550006 1494B004 1485B004 1AFFFFFB E3A0B000 E1560007 3486B004
A8008080: 3AFFFFFC E8932070 E5849000 E5851000 E3C04002 E8860011 EA000168 E3800002
A80080A0: E3A0501F EE035F10 EE024F10 EA000003 00000000 00000000 00000000 00000000
A80080C0: E1A00000 EE010F10 EE103F10 E1A03003 E1A03003 E1A0F00D E5985004 E24F40E4
A80080E0: E2444901 E1A00004 E3A03000 E2806901 E4803004 E4803004 E4803004 E4803004
Linux version 2.6.11-hh2 (root_at_Fisherss) (gcc version 3.3.3) #1 Mon Jun 13 22:44:26 CST 2005
CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Dell Axim X30
Memory policy: ECC disabled, Data cache writeback
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 624.00MHz (*3.0, active)
Memory clock: 208.00MHz (/2)
System bus clock: 208.00MHz
Built 1 zonelists
Kernel command line: root=/dev/ram0 rw ramdisk_size=12288 keepinitrd init=/linuxrc console=tty0 console=ttyS0,115200n8
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62128KB available (1761K code, 349K data, 84K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (rgooch_at_atnf.csiro.au)
devfs: boot_options: 0x0
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00300879
pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00100008
Console: switching to colour frame buffer device 60x53
ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
IPAQ flash: probing 32-bit flash bus, window=0
Probe at base[0x00](0x00000000) past the end of the map(0xffffffff)
Probe at base[0x00](0x00000000) past the end of the map(0xffffffff)
Probe at base[0x00](0x00000000) past the end of the map(0xffffffff)
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
mmc0: host does not support reading read-only switch. assuming write-enable.
mmcblk0: mmc0:275f 500224KiB
 /dev/mmc/blk0: p1
RAMDISK: Compressed image found at block 0
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 84K

now executing /linuxrc.
mounting virtual filesystems.
done.

The Penguins have taken control
on your handheld computer.
We are the .org.
.com as you know it is over.
Resistance is futile.

            (o_
(o_ (o_ //\
(/)_ (\)_ V_/_

Happpxa27x_udc: version magic '2.6.11-hh0tnb0 ARMv5 gcc-3.4' should be '2.6.11-hh2 preempt ARMv5 gcc-3.3'
y computing!

Starting USB networking
insmod: cannot insert `/lib/modules/2.6.11-hh0tnb0/kernel/drivers/usb/gadget/pxa27x_udc.ko': Invalid modg_ether: version magic '2.6.11-hh0'ule format (-1): Exec format error
insmod: cannot insert `/lib/modules/2.6.11-hh0tnb0/kernel/drivers/usb/gadget/g_ether.ko': Invalid module format (-1): Exec format error
ip: Cannot find device "usb0"
BusyBox v1.00-pre8 (2004.03.09-13:39+0000) multi-call binary

Usage: ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }

ip [ OPTIONS ] OBJECT { COMMAND | help }
where OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }

SIOCGIFFLAGS: No such device
BusyBox v1.00-pre8 (2004.03.09-13:39+0000) multi-call binary

Usage: ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }

ip [ OPTIONS ] OBJECT { COMMAND | help }
where OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }

ip: Cannot find device "usb0"
BusyBox v1.00-pre8 (2004.03.09-13:39+0000) multi-call binary

Usage: ip [ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }

ip [ OPTIONS ] OBJECT { COMMAND | help }
where OBJECT := { link | addr | route | tunnel }
OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }

If this is not automatic, please run the following commands on the PC host:
> modprobe usbnet (should be automatically done by USB hotplug)
> ifconfig usb0 192.168.0.200
> route add 192.168.0.202 dev usb0
Waiting for the PC host (192.168.0.200) to be available
through the USB ethernet connection...
Received on Mon Sep 05 2005 - 17:46:07 EDT